Blog Feed: Tools Catalog

Milwaukee 2314-21 M-Spector 360™ Rotating Inspection Scope

Published on 2012-02-16 04:25:00

The Milwaukee 2314-21 M-Spector 360™ Rotating Inspection Scope features a ground-breaking rotating display enabling the user to orient the image without having to fight the cable. With a dense 640x480 digital image sensor and 4 LED lights, the M-Spector 360™ delivers best in class image quality without shadows or glare. Understanding the need to inspect at greater distances and around corners, the 2314-21 M-Spector 360™ features a 9 ft. cable with a pipe guide. Now the user can enjoy easy [..] > read more

Milwaukee 5317-21 1-9/16 Inch SDS Max Rotary Hammer

Published on 2012-02-16 04:15:00

Milwaukee 5317-21 1-9/16 Inch SDS Max Rotary Hammer features a 10.5 amp motor that delivers optimal power for concrete drilling and chipping applications. 5.5 ft-lbs of impact energy combined with 450 RPM and 3000 BPM result in fast drilling performance for the electrical, mechanical, plumbing, HVAC and general construction contractor. The 5317-21 features a 12-position chipping adjustment which allows the user to maintain the desired hammer position while chipping in any orientation. A mechanic [..] > read more

Hitachi WR9DMR, 9.6V 3/8 Inch Impact Wrench, 1 Battery, 2.0 Ah

Published on 2012-02-09 06:53:00

Hitachi WR9DMR, 9.6V 3/8 Inch Impact Wrench, 1 Battery, 2.0 Ah High performance, fan cooled, 2-piece motor for greater durability and increased performance 1,020 in-lbs of torque to power through the toughest jobs High capacity 2.0Ah batteries allow for longer run time and fewer battery charges Carbon brush access, allows the user to replace the brush as needed to greatly prolong the life of the tool 5-position belt hook, convenient for in between use, comes with an integrated LED to illumi [..] > read more

Jet 414455 J-3410-2 7X12 Horizontal Bandsaw 220V

Published on 2011-12-28 16:05:00

The Jet 414455 J-3410-2 7X12 Horizontal Bandsaw 220V. Blade guides: side-eccentric shaft and ball bearing; rear-ball bearings. Blade drive is steel, heat treated worm driving a bronze worm gear in oil bath. Heavy duty cast iron saw head and table. Oil bath hardened and ground worm gear. andles and wheels for convenient moving to various work stations. Jet 414455 J-3410-2 Horizontal Bandsaw Specifications: Model Number J-3410-2 Brand Jet Height 0 inch Width 0 inch Length 0 inch Net Weig [..] > read more

Jet 414454 J-3410 7X12 Horizontal Wet BandSaw 115V

Published on 2011-12-28 16:03:00

The Jet 414454 J-3410 7X12 Horizontal Wet BandSaw is fully equipped with a 3/4HP motor, side and rear blade guides, heavy duty cast iron head and table, and rapid acting vise. The included 3/4" bi-metal blade comes to a stop after each cut with the automatic shut-off. Jet 414454 J-3410 Horizontal Wet BandSaw Features: Side blade guides eccentric shaft, ball bearing Rear blade guides ball bearings Blade drive is steel, heat treated worm, driving a bronze worm gear in oil bath Heavy-duty cas [..] > read more

Jet 414220 J-F225 Manual Bench Cold Saw 225Mm 1HP, 115V, 1PH

Published on 2011-12-28 16:01:00

The Jet 414220 J-F225 Manual Bench Cold Saw 225Mm comes with a 225mm blade for sawing solid steel. With a 1HP motor, manual vise, bronze worm gear, and hardened ground worm screw gear box, this bench cold saw is everything but small. Jet 414220 J-F225 Manual Bench Cold Saw Features: Manually cuts from 0-45 degrees left Bronze worm gear and hardened ground worm screw gear box in an oil bath Control handle with a safety spring loaded trigger switch to start or stop the machine Coolant sys [..] > read more

Jet 414217K J-FK350-4K 350Mm Manual Cold Saw Ferrous 460V

Published on 2011-12-28 15:59:00

The Jet 414217K J-FK350-4K 350Mm Manual Cold Saw Ferrous 460V. Ferrous cold saw. Manual saw. Sturdy gear box design. Manually cuts from 45° left to 45° right. Miter stops at 90°, 45° left and 45° right. Double self-centering vise for burr free cuts. Thermal overload protection with magnetic starter. Jet 414217K J-FK350-4K Manual Cold Saw Specifications:Model Number J-FK350-4K Brand Jet Height 0 inch Width 0 inch Length 0 inch Net Weight 706 pound Gross Weight 760 pound Round at 90 [..] > read more

Jet 414227 CS-315 Manual Cold Saw 315mm

Published on 2011-12-28 15:58:00

The Jet 414227 CS-315 Manual Cold Saw 315mm. uses a 315mm blade to cut through solid steel. With 2 cutting speeds, the CS-275 is ideal for cutting pipes and bars. Heavy duty cast iron frame base standard. Cast dual pivot saw head. Two cutting speeds. Hardened and ground worm and wheel gear box. 1.5 gallon coolant tank capacity. Integral flood-style coolant system. 30 inch material length stop. Safety. Jet 414226 CS-275 Manual Cold Saw Specifications:Model Number CS-275 Brand Jet Overall [..] > read more

Jet 414203K J-CK350-2K 350Mm Manual Cold Saw Non-Ferrous 220V

Published on 2011-12-28 15:58:00

The Jet 414203K J-CK350-2K 350Mm Manual Cold Saw Non-Ferrous 220V. Non-Ferrous cold saw. Mitering capabilities - stops 90°, 45° left and 45° right. Double self-centering vise for burr free cuts . Two cutting speeds. Thermal overload protection with magnetic starter High speed manual saw. Jet 414203K J-CK350-2K Manual Cold Saw Specifications:Model Number J-CK350-2K Brand Jet Height 0 inch Width 0 inch Length 0 inch Net Weight 683 pound Gross Weight 725 pound Round at 90 Degrees (in.) [..] > read more

Jet 414226 CS-275 Manual Cold Saw 275mm

Published on 2011-12-28 15:57:00

The Jet 414226 CS-275 Manual Cold Saw 275mm uses a 275mm blade to cut through solid steel. With 2 cutting speeds, the CS-275 is ideal for cutting pipes and bars. Heavy duty cast iron frame base standard. Cast dual pivot saw head. Two cutting speeds. Hardened and ground worm and wheel gear box. 1.5 gallon coolant tank capacity. Integral flood-style coolant system. 30 inch material length stop. Safety guards. Capable of slotting. Jet 414226 CS-275 Manual Cold Saw Specifications:Model Number C [..] > read more

Grizzly G0500 14 Inch Sliding Table Saw

Published on 2011-07-01 17:04:00

Grizzly G0500 14 Inch Sliding Table Saw. This review is from: Grizzly G0501 14" Sliding Table Saw (Misc.) The company I work for in their startup purchased this machine. I was the one that set it up, which probaly took 10 hours. The sliding table, > read more

Grizzly G0497 Professional Planishing Hammer

Published on 2011-07-01 16:46:00

Grizzly G0497 Professional Planishing Hammer will shape mild steel up to 16 gauge. Air operated, it includes filter, oiler and foot pedal. Stainless steel main shaft and hardened steel hammer head. Grizzly G0497 Professional Planishing Hammer Specifi > read more

Grizzly G0496 Professional English Wheel

Published on 2011-07-01 16:44:00

Grizzly G0496 Professional English Wheel Features 9 interchangeable hardened metal rolls with sealed bearings, cam quick release and foot wheel. Grizzly G0496 Professional English Wheel Specifications:Overall dimensions: 53"H x 30-7/8"W x 44-1/2"D Th > read more

Grizzly G0495X 8 Inch x 84 Inch Jointer with Exclusive Digital Height Readout

Published on 2011-07-01 16:42:00

Grizzly G0495X 8 Inch x 84 Inch Jointer with Exclusive Digital Height Readout. Digital readout for infeed table height Magnetic switch with thermal overload protection Precision ground cast iron tables and fence Parallelogram table adjustment Handwh > read more

Grizzly G0488 14 Inch 10 HP 3-Phase Sliding Table Saw

Published on 2011-07-01 16:06:00

Grizzly G0488 14 Inch 10 HP 3-Phase Sliding Table Saw Having all the features of our G0451 Sliding Table Saw, our new G0493 has the addition of a larger 10 foot travel on the sliding table. > read more

Grizzly G0487 51 Inch 30 HP 3-Phase Double Wide-Belt Sander

Published on 2011-07-01 16:02:00

Grizzly G0487 51 Inch 30 HP 3-Phase Double Wide-Belt Sander feature dual heads enabling them to sand to finer grits in a single pass! The first belt runs on a single drum and the rear belt runs on a platen system which allows you to adjust the sandin > read more

Grizzly G0481 42 Inch Swivel Bending Brake

Published on 2011-07-01 16:00:00

Grizzly G0481 42 Inch Swivel Bending Brake. Maximum working length: 42" Maximum sheet metal thickness: 16 Ga. mild steel Maximum clamping beam lift: 4 3/4" Maximum bending angle: 150 degrees Box bending fingers: (4 each) 1-1/2", 2", 3", 4" Overall d > read more

Grizzly G0477 15 Inch Planer / Moulder

Published on 2011-07-01 15:57:00

Grizzly G0477 15 Inch Planer / Moulder A powerful universal motor and high speed cutterhead will make quick and convenient work out of your planing and moulding jobs. Easy knife changes along with a large selection of profiles adds versatility and th > read more

Grizzly G0476 Benchtop Sandblast Cabinet

Published on 2011-07-01 15:55:00

Grizzly G0476 Benchtop Sandblast Cabinet. can be filled with a variety of abrasive material for cleaning, polishing and finishing. Sealed gloves allow complete access inside the enclosed cabinet for operating the blast gun and moving the part. Includ > read more

Grizzly G0475 10 Gal Portable Sandblaster

Published on 2011-07-01 15:46:00

Grizzly G0475 10 Gal Portable Sandblaster. Pressurized tank for more sandblasting power 4 Valves for optimum control over the air/sand stream Heavy-duty feed hose and fittings for long life Self emptying moisture trap Pressure gauge Safety pressure > read more

Grizzly G0503 12 Inch Horizontal Re-Saw Bandsaw

Published on 2011-06-30 15:59:00

Grizzly G0503 12 Inch Horizontal Re-Saw Bandsaw this Grizzly G0503 bandsaw can re-saw all day long from the hardest species of wood without taking a rest. And because of its horizontal design, you can count on accurate and consistent results every ti > read more

Grizzly G0474 20 Gal Portable Sandblaster

Published on 2011-06-20 16:50:00

Grizzly G0474 20 Gal Portable Sandblaster. Pressurized tank for more sandblasting power 4 Valves for optimum control over the air/sand stream Heavy-duty feed hose and fittings for long life Self emptying moisture trap Pressure gauge Safety pressure > read more

Grizzly G0473 Benchtop Sandblast Cabinet

Published on 2011-06-20 16:48:00

Grizzly G0473 Benchtop Sandblast Cabinet. This Benchtop Sandblaster safely cleans and restores parts and assemblies without taking up much shop space. Two doors measuring 16" wide allow easy access and the large 19" wide x 10 3/4" tall window provide > read more

Grizzly G0472 Cabinet Sandblaster, Double Door

Published on 2011-06-20 16:41:00

Grizzly G0472 Cabinet Sandblaster, Double Door. Blast away paint and rust without making a mess around your shop. Two large doors make loading and unloading a snap and the lower hopper stores the sandblasting media for reuse or easy removal. Include > read more

Grizzly G0471 13 Gallon 3 HP Air Compressor

Published on 2011-06-20 16:39:00

Grizzly G0471 13 Gallon 3 HP Air Compressor. 3 HP, 220V motor 18 amps Oil lubricated pump (oil sold separately) 13.2 gallon tank 115 PSI maximum pressure 6.7 CFM at 40 PSI 5.7 CFM at 90 PSI Includes regulator with pressure gauges, safety valve and q > read more

Grizzly G0469 4 Gallon 2 HP Air Compressor

Published on 2011-06-20 16:35:00

Grizzly G0469 4 Gallon 2 HP Air Compressor. 2 HP, 110V motor 14 Amps Oil lubricated pump (oil sold separately) 4 gallon tank 115 PSI maximum pressure 4.5 CFM at 40 PSI 3.6 CFM at 90 PSI Includes regulator with pressure gauges, safety valve and quick > read more

Grizzly G0468 1.5 Gallon 1.5 HP Air Compressor

Published on 2011-06-20 16:32:00

Grizzly G0468 1.5 Gallon 1.5 HP Air Compressor. 1 1/2 HP, 110V motor 8 amps Oil-less pump 1.59 gallon tank 115 PSI maximum pressure 2.9 CFM at 40 PSI 2.1 CFM at 90 PSI Includes regulator with pressure gauges, safety valve and quick connect hose coup > read more

Grizzly G0466 4 Gallon 1.5 HP Air Compressor

Published on 2011-06-20 16:30:00

Grizzly G0466 4 Gallon 1.5 HP Air Compressor 1 1/2 HP, 110V motor 8 amps Oil lubricated pump (oil sold separately) 4 gallon tank 115 PSI maximum pressure 3.1 CFM at 40 PSI 2.2 CFM at 90 PSI Includes regulator with pressure gauges, safety valve and q > read more

Grizzly G0465 3 Gallon 1.5 HP Air Compressor

Published on 2011-06-20 16:16:00

Grizzly G0465 3 Gallon 1.5 HP Air Compressor. 1 1/2 HP, 110V motor 8 amps Oil lubricated pump (oil sold separately) 3.17 gallon tank 115 PSI maximum pressure 3.1 CFM at 40 PSI 2.2 CFM at 90 PSI Includes regulator with pressure gauges, safety valve a > read more

Grizzly G0464 1.5 Gallon 1.5 HP Air Compressor

Published on 2011-06-20 16:14:00

Grizzly G0464 1.5 Gallon 1.5 HP Air Compressor. 8 amps Oil lubricated pump (oil sold separately) 1.59 gallon tank 115 PSI maximum pressure 3.1 CFM at 40 PSI 2.2 CFM at 90 PSI Includes regulator with pressure gauges, safety valve and quick connect ho > read more

Grizzly G0458 12 Inch Baby Drum Sander

Published on 2011-06-20 16:11:00

Grizzly G0458 12 Inch Baby Drum Sander This baby Drum Sander packs a wallop when it comes to sanding wood up to 12" wide for the ultimate finish. Sized for bench tops or sturdy tool stands, it comes equipped with a 1 1/2 HP sanding motor, a variable > read more

Grizzly C2317 Reversible Stile & Rail - Ogee w/ Rub Collar, 3/4 Inch Bore

Published on 2011-06-19 17:50:00

Grizzly C2317 Reversible Stile & Rail - Ogee w/ Rub Collar, 3/4 Inch Bore Safety Cutter. Shims and 2 T-bushings are included. Grizzly C2317 Stile & Rail - Ogee Specifications:Cutter Dia.: 2-1/2" Cutting Length: 1" Cutting Depth: 3/8" Slot: 1/4" > read more

Grizzly C2316 Reversible Stile & Rail - Classical w/ Rub Collar, 3/4 Inch Bore

Published on 2011-06-19 17:48:00

Grizzly C2316 Reversible Stile & Rail - Classical w/ Rub Collar, 3/4 Inch Bore Safety Cutter. Shims and 2 T-bushings are included. Grizzly C2316 Stile & Rail - Classical Specifications:Cutter Dia.: 2-1/2" Cutting Length: 1" Cutting Depth: 3/8" Slot: > read more

Grizzly C2315 Reversible Stile & Rail - Beveled w/ Rub Collar, 3/4 Inch Bore

Published on 2011-06-19 17:46:00

Grizzly C2315 Reversible Stile & Rail - Beveled w/ Rub Collar, 3/4 Inch Bore Safety Cutter. Shims and 2 T-bushings are included. Grizzly C2315 Stile & Rail - Beveled Specifications:Cutter Dia.: 2-1/2" Cutting Length: 1" Cutting Depth: 3/8" Slot: 1/4 > read more

Grizzly C2314 Reversible Stile & Rail - Roman Ogee Bit w/ Rub Collar, 3/4 Inch Bore

Published on 2011-06-19 17:45:00

Grizzly C2314 Reversible Stile & Rail - Roman Ogee Bit w/ Rub Collar, 3/4 Inch Bore Safety Cutter. Shims and 2 T-bushings are included. Grizzly C2314 Stile & Rail - Roman Ogee Bit Specifications:Cutter Dia.: 2-1/2" Cutting Length: 1" Cutting Depth: 3 > read more

Grizzly C2125 Shaper Cutter - Double Lock Miter, 3/4 Inch Bore

Published on 2011-06-19 17:42:00

Grizzly C2125 Shaper Cutter - Double Lock Miter, 3/4 Inch Bore features top-quality C-2 carbide - the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructe > read more

Grizzly C2122 Shaper Cutter - 3/4 Inch "V" Paneling Cutter Set, 3/4 Inch Bore

Published on 2011-06-19 17:40:00

Grizzly C2122 Shaper Cutter - 3/4 Inch "V" Paneling Cutter Set, 3/4 Inch Bore Make paneling, wainscoting, decking and flooring with these V-match sets. Grizzly C2122 Shaper Cutter Specifications:Cutter Dia.: 2-3/4" Cutting Length: 1" Cutting Width: 5 > read more

Grizzly C2121 Shaper Cutter - 1/2 Inch "V" Paneling Cutter Set, 3/4 Inch Bore

Published on 2011-06-19 17:37:00

Grizzly C2121 Shaper Cutter - 1/2 Inch "V" Paneling Cutter Set, 3/4 Inch Bore Make paneling, wainscoting, decking and flooring with these V-match sets. Grizzly C2121 Shaper Cutter Specifications:Cutter Dia.: 2-5/8" Cutting Length: 3/4" Cutting Width: > read more

Grizzly C1712 Corner Lock Miter Bit, 1/2 Inch Shank

Published on 2011-06-19 17:35:00

Grizzly C1712 Corner Lock Miter Bit, 1/2 Inch Shank Use for making 90° corner joints in wood for 1/2" to 9/16" material. Great for jewelry boxes and drawers! Grizzly C1712 Corner Lock Miter Bit Specifications:Cutter Dia.: 1-5/8" Cutting Length: 11/ > read more

Grizzly C1711 Corner Lock Miter Bit, 1/4 Inch Shank

Published on 2011-06-19 17:33:00

Grizzly C1711 Corner Lock Miter Bit, 1/4 Inch Shank Use for making 90° corner joints in wood for 1/2" to 9/16" material. Great for jewelry boxes and drawers. Grizzly C1711 Corner Lock Miter Bit Specifications:Cutter Dia.: 1-5/8" Cutting Length: 11/1 > read more

Grizzly C1692 One pc. Stile and Rail Set - Ogee Bit

Published on 2011-06-19 17:31:00

Grizzly C1692 One pc. Stile and Rail Set - Ogee Bit Cut stiles and rails without rearranging the bit - just flip the workpiece over and re-set the cutting height. Designed for 3/4" material. 1/2" shank. Grizzly® cutters feature top-quality carbide - > read more

Kreg LH-DKDB 3/8 Inch Left-Hand Step Drill Bit for DK3100

Published on 2011-06-18 17:01:00

Kreg LH-DKDB 3/8 Inch Left-Hand Step Drill Bit for DK3100 For use in Kreg's DK3100 Pocket Hole Machine only. Kreg LH-DKDB Made with Cobalt steel to increase drill bit life. For use specifically in Kreg's DK3100 Multi-Spindle Pocket Hole Machine. Not > read more

Kreg DKDB 3/8 Inch Step Drill Bit for Kreg Pocket Machines, 6-3/4 Inch length

Published on 2011-06-18 16:59:00

Kreg DKDB 3/8 Inch Step Drill Bit for Kreg Pocket Machines, 6-3/4 Inch length or pocket hole machines. Produces a clean pocket hole that can be plugged. Made from cobalt steel for longer life. Simple, 1-piece design. For use in all Kreg machines and > read more

Kreg KMA1000 Multi-Purpose Push Stick

Published on 2011-06-18 16:33:00

Kreg KMA1000 Multi-Purpose Push Stick Powerful Magnet Lets You Store Push Stick Almost Anywhere. Constructed from Durable Impact Resistant Plastic. Ergonomic Easy-Grip Handle. > read more

Kreg KMS7511 Trak Clamp

Published on 2011-06-18 16:30:00

Kreg KMS7511 Trak Clamp Connects to Mini Trak, Top Trak, or HD Trak. Small, simple design. Comes with all necessary hardware. > read more

Kreg KMS7303 30 Inch Jig & Fixture Bar

Published on 2011-06-18 16:19:00

Kreg KMS7303 30 Inch Jig & Fixture Bar Six (6) adjustable Nylon Set Screws included. 30” long aircraft-grade aluminum. 3/8” tall, ¾” wide. > read more

Kreg KMS7402 42 Inch Adjustable Miter Trak

Published on 2011-06-18 16:15:00

Kreg KMS7402 42 Inch Adjustable Miter Trak Inexpensive and clever means of putting miter gauge on router table. Works with any 3/4" by 3/8" miter gauge bar. > read more

Kreg KMS7509 48 Inch (4 Foot) Mini Trak

Published on 2011-06-18 16:02:00

Kreg KMS7509 48 Inch (4 Foot) Mini Trak Produce countless types of woodshop jigs and fixtures with Kregs Mini T-Track.. This track is 3/8" tall x 3/4" wide and accepts any 1/4" hex bolt. 4 nonstick measuring tape can be added to inner track. > read more

Kreg KMS7508 36 Inch (3 Foot) Mini Trak

Published on 2011-06-18 15:59:00

Kreg KMS7508 36 Inch (3 Foot) Mini Trak Compact 3/8” x 3/4” frame Easily cut to length with a hack saw. Compatible with the Kreg ½” Measuring Tape. > read more

Kreg KMS7507 24 Inch (2 Foot) Mini Trak

Published on 2011-06-18 15:57:00

Kreg KMS7507 24 Inch (2 Foot) Mini Trak Compact 3/8” x 3/4” frame Produce countless types of woodshop jigs and fixtures with Kregs Mini T-Track.. This track is 3/8" tall x 3/4" wide and accepts any 1/4" hex bolt. 4 nonstick measuring tape can be > read more

Kreg KMS7448 48 Inch Combo-Trak

Published on 2011-06-18 15:55:00

Kreg KMS7448 48 Inch Combo-Trak Works with your miter gauge, featherboards, and other accessories. 48” Long x 1-5/8” Wide x 9/16” Deep. T-Track accepts ¼” Hex Bolts. Standard Sized ¾” Miter Track. > read more

Kreg KMS7102 Precision Miter Gauge System

Published on 2011-06-17 16:21:00

Kreg KMS7102 Precision Miter Gauge System 24" bar with 5 bar adjusters eliminates the play between the bar and the miter slot. 24" Fence section with patented Swing Stop. Factory calibrated... perfect right out of the box. Positive stops at 0, 10, 22 > read more

Kreg NZ03-B Full Extenstion Drawer Mounting Brackets

Published on 2011-06-17 16:18:00

Kreg NZ03-B Full Extenstion Drawer Mounting Brackets The Kreg NZ03-B 12 Inch brackets work with most common drawer sizes, and the 1/8” tabs on the front of bracket are designed to fit under mounted full-extension slides for perfect placement every > read more

Kreg NZ03 Magnetic Drawer Slide Mounting Tool

Published on 2011-06-17 16:16:00

Kreg NZ03 Magnetic Drawer Slide Mounting Tool The tool includes an easy-grip handle and provides a flat surface for easy clamping. Designed to work with both face-frame and faceless cabinets, the mounting tool features large openings in the side to g > read more

Kreg SML-C250S5-2000 2-1/2 Inch 305 Stainless Steel Pocket Screws No.10 Crse, Washer-Head, 2000 Count

Published on 2011-06-17 16:12:00

Kreg SML-C250S5-2000 2-1/2 Inch 305 Stainless Steel Pocket Screws No.10 Crse, Washer-Head, 2000 Count excessive exposure to salt water, and other exceedingly corrosive environments such as ACQ treated lumber. > read more

Kreg SML-C250S5-250 2-1/2 Inch 305 Stainless Steel Pocket Screws No.10 Crse, Washer-Head, 250 Count

Published on 2011-06-17 16:10:00

Kreg SML-C250S5-250 2-1/2 Inch 305 Stainless Steel Pocket Screws No.10 Crse, Washer-Head, 250 Count Sharp edge of self-tapping tip drills a cleaner pilot hole. Thicker fillet radius under the head reduces the possibility of the head twisting off. > read more

Kreg SML-C250S5-50 2-1/2 Inch 305 Stainless Steel Pocket Screws No.10 Crse, Washer-Head, 50 Count

Published on 2011-06-17 16:08:00

Kreg SML-C250S5-50 2-1/2 Inch 305 Stainless Steel Pocket Screws No.10 Crse, Washer-Head, 50 Count Screws are suitable for most marine applications. Perfect for outdoor furniture. Handy for most outdoor projects, compatible with ACQ treated lumber, an > read more

Kreg SML-C150S5-5000 1-1/2 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 5000 Count

Published on 2011-06-17 16:06:00

Kreg SML-C150S5-5000 1-1/2 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 5000 Count Large Maxi-Loc Head stops when it hits the bottom of the hole. Thicker fillet radius under the head reduces the possibility of the head twisting off. > read more

Kreg SML-C150S5-1000 1-1/2 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 1000ct

Published on 2011-06-17 16:03:00

Kreg SML-C150S5-1000 1-1/2 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 1000ct Great for outdoor applications. Large Maxi-Loc Head stops when it hits the bottom of the hole. Thicker fillet radius under the head reduces the possibili > read more

Kreg SML-C150S5-100 1-1/2 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 100 Count

Published on 2011-06-17 16:01:00

Kreg SML-C150S5-100 1-1/2 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 100 Count excessive exposure to salt water, and other exceedingly corrosive environments such as ACQ treated lumber. > read more

Kreg SML-F125S5-5000 1-1/4 Inch 305 Stainless Steel Pocket Screws No.7 Fine, Washer-Head, 5000 Count

Published on 2011-06-17 15:59:00

Kreg SML-F125S5-5000 1-1/4 Inch 305 Stainless Steel Pocket Screws No.7 Fine, Washer-Head, 5000 Count Sharp edge of self-tapping tip drills a cleaner pilot hole. Needle sharp point minimizes walking. Large Maxi-Loc Head stops when it hits the bottom o > read more

Kreg SML-C125S5-5000 1-1/4 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 5000 Count

Published on 2011-06-16 17:39:00

Kreg SML-C125S5-5000 1-1/4 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 5000 Count Thicker fillet radius under the head reduces the possibility of the head twisting off. Sharp edge of self-tapping tip drills a cleaner pilot hole. Ne > read more

Kreg SML-C125S5-1000 1-1/4 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 1000 Count

Published on 2011-06-16 17:36:00

Kreg SML-C125S5-1000 1-1/4 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 1000 Count Thicker fillet radius under the head reduces the possibility of the head twisting off. Sharp edge of self-tapping tip drills a cleaner pilot hole. Ne > read more

Kreg SML-C125S5-100 1-1/4 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 100 Count

Published on 2011-06-16 17:33:00

Kreg SML-C125S5-100 1-1/4 Inch 305 Stainless Steel Pocket Screws No.8 Crse, Washer-Head, 100 Count Self-tapping screw tips make for easy driving. Wide heads boast incredible holding power. Deep-seated #2 square drive heads eliminate ''cam out'', ensu > read more

Kreg SML-C250B-2000 2-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 2000 Count

Published on 2011-06-16 17:30:00

Kreg SML-C250B-2000 2-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 2000 Count an extensive process which chemically combines three special anti-corrosion layers, Blue-Kote screws take on amazing new rust-resistant properties which are > read more

Kreg SML-C250B-250 2-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 250 Count

Published on 2011-06-16 17:29:00

Kreg SML-C250B-250 2-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 250 Count an ideal choice for garden and patio furniture, as well as for general exterior construction. Self-tapping screw tips make for easy driving. Case hardened stee > read more

Kreg SML-C250B-50 2-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 50 Count

Published on 2011-06-16 17:27:00

Kreg SML-C250B-50 2-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 50 Count an ideal choice for garden and patio furniture, as well as for general exterior construction. Self-tapping screw tips make for easy driving. Case hardened steel > read more

Kreg SML-C2B-3000 2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 3000 Count

Published on 2011-06-16 17:24:00

Kreg SML-C2B-3000 2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 3000 Count Through an extensive process which chemically combines three special anti-corrosion layers, Blue-Kote screws take on amazing new rust-resistant properties which ar > read more

Kreg SML-C2B-250 2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 250 Count

Published on 2011-06-16 17:23:00

Kreg SML-C2B-250 2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 250 Count Performs 400% better in corrosion resistance than our old zinc-plated screws. Sharp edge of self-tapping tip drills a cleaner pilot hole. Large Maxi-Loc Head stops w > read more

Kreg SML-C2B-50 2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 50 Count

Published on 2011-06-16 17:21:00

Kreg SML-C2B-50 2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 50 Count Its the best choice for the majority of exterior pocket-hole screw applications and general exterior construction. Deep square drive offers optimum driver engagement. > read more

Kreg SML-C150B-5000 1-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 5000 Count

Published on 2011-06-16 17:19:00

Kreg SML-C150B-5000 1-1/2 Inch Blue-Kote WR Pocket Screws No.8 Crse, Washer-Head, 5000 Count Through an extensive process which chemically combines three special anti-corrosion layers, Blue-Kote screws take on amazing new rust-resistant properties wh > read more

Kreg SML-F125 - 500 1-1/4 Inch Pocket Screws No.7 Fine, Washer-Head, 500 Count

Published on 2011-06-15 16:13:00

Kreg SML-F125 - 500 1-1/4 Inch Pocket Screws No.7 Fine, Washer-Head, 500 Count features a type 17 auger tip that self-taps its own hole, eliminating the need to pre-drill in even the hardest materials. The large diameter steel shanks feature a bronze > read more

Kreg SML-F125 - 100 1-1/4 Inch Pocket Screws No.7 Fine, Washer-Head, 100 Count

Published on 2011-06-15 16:05:00

Kreg SML-F125 - 100 1-1/4 Inch Pocket Screws No.7 Fine, Washer-Head, 100 Count features a type 17 auger tip that self-taps its own hole, eliminating the need to pre-drill in even the hardest materials. The large diameter steel shanks feature a bronze > read more

Kreg SPS-F125 - 5000 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 5000 Count

Published on 2011-06-15 16:02:00

Kreg SPS-F125 - 5000 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 5000 Count Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any comb > read more

Kreg SPS-F125 - 1000 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 1000 Count

Published on 2011-06-15 15:59:00

Kreg SPS-F125 - 1000 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 1000 Count Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any comb > read more

Kreg SPS-F125 - 500 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 500

Published on 2011-06-15 15:57:00

Kreg SPS-F125 - 500 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 500 Count Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combin > read more

Kreg SPS-F125 - 100 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 100 Count

Published on 2011-06-15 15:56:00

Kreg SPS-F125 - 100 1-1/4 Inch Pocket Screws No.6 Fine, Pan-Head, 100 Count Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combin > read more

Kreg SML-C1 - 5000 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 5000 Count

Published on 2011-06-15 15:54:00

Kreg SML-C1 - 5000 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 5000 Count Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combi > read more

Kreg SML-C1 - 1000 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 1000 Count

Published on 2011-06-15 15:52:00

Kreg SML-C1 - 1000 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 1000 Count Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combi > read more

Kreg SML-C1 - 500 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 500 Count

Published on 2011-06-15 15:51:00

Kreg SML-C1 - 500 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 500 Count Designed for pocket-hole systems, Kreg pocket-hole screws increase the strength of a pocket-hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combina > read more

Kreg SML-C1 - 100 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 100 Count

Published on 2011-06-15 15:39:00

Kreg SML-C1 - 100 1 Inch Pocket Screws No.8 Coarse, Washer-Head, 100 Count 1" Coarse Thread self tapping screws are specially designed for pocket hole joinery. They feature a self tapping auger point that eliminates pre drilling and a flat head that > read more

Powermatic 1792074K PM1900TX-CK3 Dust Collector 3HP 3PH 230/460V, 2-Micron Canister Kit

Published on 2011-06-14 17:02:00

Powermatic 1792074K PM1900TX-CK3 Dust Collector 3HP 3PH 230/460V, 2-Micron Canister Kit is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to pr > read more

Powermatic 1792073K PM1900TX-BK3 Dust Collector 3HP 3PH 230/460V, 30-Micron Bag Filter Kit

Published on 2011-06-14 17:00:00

Powermatic 1792073K PM1900TX-BK3 Dust Collector 3HP 3PH 230/460V, 30-Micron Bag Filter Kit is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to > read more

Powermatic 1792072K PM1900TX-CK1 Dust Collector 3HP 1PH 230V, 2-Micron Canister Kit

Published on 2011-06-14 16:57:00

Powermatic 1792072K PM1900TX-CK1 Dust Collector 3HP 1PH 230V, 2-Micron Canister Kit features the exclusive TurboCone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The canis > read more

Powermatic 1792071K PM1900TX-BK1 Dust Collector 3HP 1PH 230V, 30-Micron Bag Filter Kit

Published on 2011-06-14 16:55:00

Powermatic 1792071K PM1900TX-BK1 Dust Collector 3HP 1PH 230V, 30-Micron Bag Filter Kit is strong enough to use with planers, wide belt sanders, table saws and most other woodworking machines. The exclusive TurboCone™ improves chip separation to pre > read more

Powermatic 1791079K PM1300TX-CK Dust Collector 1.75HP 1PH 115/230V, 2-Micron Canister Kit

Published on 2011-06-14 16:53:00

Powermatic 1791079K PM1300TX-CK Dust Collector 1.75HP 1PH 115/230V, 2-Micron Canister Kit features the exclusive TurboCone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The > read more

Powermatic 1791078K PM1300TX-BK Dust Collector 1.75HP 1PH 115/230V, 30-Micron Bag Filter Kit

Published on 2011-06-14 16:50:00

Powermatic 1791078K PM1300TX-BK Dust Collector, 1.75HP 1PH 115/230V, 30-Micron Bag Filter Kit features the exclusive TurboCone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. > read more

Jet 710704K DC-1200VX-CK3 Dust Collector 2-Micron Canister Kit

Published on 2011-06-14 16:47:00

Jet 710704K DC-1200VX-CK3 Dust Collector 2HP 3PH 230/460-Volt 2-Micron Canister Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The hig > read more

Jet 710703K DC-1200VX-BK3 Dust Collector 30-Micron Bag Filter Kit

Published on 2011-06-14 16:44:00

Jet 710703K DC-1200VX-BK3 Dust Collector 2HP 3PH 230/460-Volt 30-Micron Bag Filter Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The > read more

Jet 710702K DC-1200VX-CK1 Dust Collector 2-Micron Canister Kit

Published on 2011-06-14 16:40:00

Jet 710702K DC-1200VX-CK1 Dust Collector 2HP 1PH 230-Volt 2-Micron Canister Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high ai > read more

Jet 710701K DC-1200VX-BK1 Dust Collector 30-Micron Bag Filter Kit

Published on 2011-06-14 16:37:00

Jet 710701K DC-1200VX-BK1 Dust Collector 2HP 1PH 230-Volt 30-Micron Bag Filter Kit features the exclusive Vortex Cone™ which improves chip separation to prevent clogging of the filter, and increases packing efficiency of the collector bag. The high > read more

Kreg PRS4275 Router Bit 3/8 Inch Specialty Bead Cutter Profile #6

Published on 2011-06-13 16:05:00

Kreg PRS4275 Router Bit 3/8 Inch Specialty Bead Cutter Profile #6 is used for creating 3/8” deep, ‘h’-shaped beading profiles. This bit works with all Kreg 3/8” Notching Bits (PRS4210 and PRS4215). > read more

Kreg PRS4270 Router Bit 3/8 Inch Specialty Bead Cutter Profile #5

Published on 2011-06-13 16:03:00

Kreg PRS4270 Router Bit 3/8 Inch Specialty Bead Cutter Profile #5 is used for creating 3/8” deep, ‘m’-shaped beading profiles. This bit works with all Kreg 3/8” Notching Bits (PRS4210 and PRS4215. > read more

Kreg PRS4265 Router Bit 3/8 Inch Specialty Bead Cutter - Profile #4

Published on 2011-06-13 16:01:00

Kreg PRS4265 Router Bit 3/8 Inch Specialty Bead Cutter - Profile #4 is used for creating 3/8” deep, ‘s’-shaped beading profiles. This bit works with all Kreg 3/8” Notching Bits (PRS4210 and PRS4215). > read more

Kreg PRS4260 Router Bit 3/8 Inch Standard Bead Cutter

Published on 2011-06-13 16:00:00

Kreg PRS4260 Router Bit 3/8 Inch Standard Bead Cutter is used for creating 3/8” deep beading profiles. This bit works with all Kreg 3/8” Notching Bits (PRS4210 and PRS4215). > read more

Kreg PRS4255 Router Bit 5/16 Inch Standard Bead Cutter

Published on 2011-06-13 15:58:00

Kreg PRS4255 Router Bit 5/16 Inch Standard Bead Cutter is used for creating 3/8” deep, stepped, beading profiles. This bit works with all Kreg 3/8” Notching Bits (PRS4210 and PRS4215). > read more

Kreg PRS4250 Router Bit 1/4 Inch Standard Bead Cutter

Published on 2011-06-13 15:50:00

Kreg PRS4250 Router Bit 1/4 Inch Standard Bead Cutter is used for creating ¼” deep beading profiles. This bit is included with the Precision Beaded Face-Frame System, and works with the ¼” x 1-1/2” Notching Bit (PRS4200) and ¼” x 2” Notc > read more

Kreg PRS4215 Router Bit 3/8 Inch x 2 Inch Notch Cutter

Published on 2011-06-13 15:41:00

Kreg PRS4215 Router Bit 3/8 Inch x 2 Inch Notch Cutter is used for creating 3/8” deep notches for all 5/16” and 3/8” beading profiles. Provides one-pass operation for cutting a notch for 2” wide rails. > read more

Kreg PRS4210 Router Bit 3/8 Inch x 1-1/2 Inch Notch Cutter

Published on 2011-06-13 15:35:00

Kreg PRS4210 Router Bit 3/8 Inch x 1-1/2 Inch Notch Cutter is used for creating 3/8” deep notches for all 5/16” and 3/8” beading profiles. Provides one-pass operation for cutting a notch for 1-1/2” wide rails. > read more

Kreg PRS4205 Router Bit 1/4 Inch x 2 Inch Notch Cutter

Published on 2011-06-13 15:33:00

Kreg PRS4205 Router Bit 1/4 Inch x 2 Inch Notch Cutter For material widths greater than 2-Inch, multiple passes using either the PRS4200 or PRS4205 are required. The Kreg PRS4205 is used for creating ¼” deep notches for ¼” beading profiles. Thi > read more

Kreg PRS4200 Router Bit 1/4 Inch x 1-1/2 Inch Notch Cutter

Published on 2011-06-13 15:30:00

Kreg PRS4200 Router Bit 1/4 Inch x 1-1/2 Inch Notch Cutter is used for creating ¼” deep notches for ¼” beading profiles. This bit is included with the Precision Beaded Face-Frame System, and works with the ¼” Standard Beading Bit (PRS4250). > read more

Kreg PRS1200 Precision Beaded Face-Frame System

Published on 2011-06-12 16:43:00

Kreg PRS1200 Precision Beaded Face-Frame System Dramatically reduces the cost of building beaded face-frames. Routed notches for more accurate cuts, better finished look. Attached beads mean no nailing, no gluing, and no awkward miters. Engineere > read more

Kreg PRS3400 Precision Router Table Set Up Bars - Set of 7

Published on 2011-06-12 16:41:00

Kreg PRS3400 Precision Router Table Set Up Bars - Set of 7 Unique design straddles the Router Bit or saw blade to allow for more precise height adjustment. Step on the top edge of each setup bar acts as a gauge to test the depth of your completed cut > read more

Kreg PRS3100 Multi-Purpose Router Table Switch

Published on 2011-06-12 11:54:00

Kreg PRS3100 Multi-Purpose Router Table Switch The Kreg multi-purpose router table switch adds safety and convenience to your router table. The switch features a compact design, an 8ft. long 14-Gauge power cord and an easy-to-use lockable paddle swit > read more

Kreg PRS3040 Precision Router Table Insert Plate Levelers

Published on 2011-06-12 11:53:00

Kreg PRS3040 Precision Router Table Insert Plate Levelers 8 adjustable points of contact. Four-corner lock-downs. Locating tabs for easy installation. Package includes 4 Insert Plate Levelers. Designed for 3/4" corner radius. Works with router ta > read more

Kreg PRS3030 Precision Router Table Insert Plate

Published on 2011-06-12 11:51:00

Kreg PRS3030 Precision Router Table Insert Plate Rugged 3/8” phenolic Insert Plate Size. (9-1/4” x 11-3/4” x 3/8”) 3/4" corner radius. Exclusive Bottom-up mounting design. Dual reducing rings (2” and 1-13/64”). Compatible with standar > read more

Kreg PRS3020 True-FLEX Featherboard - Twin Pack

Published on 2011-06-12 11:49:00

Kreg PRS3020 True-FLEX Featherboard - Twin Pack The True-FLEX Featherboard gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, r > read more

Kreg PRS3010 True-FLEX Featherboard - Single

Published on 2011-06-12 11:47:00

Kreg PRS3010 True-FLEX Featherboard - Single Carefully designed fingers apply optimum pressure. Includes Wedge-lock™ Hardware for miter slot and t-slot compatibility. Extremely durable plastic composite body. > read more

Kreg PRS1020 24 Inch x 36 Inch Precision Router Table Top

Published on 2011-06-12 11:45:00

Kreg PRS1020 24 Inch x 36 Inch Precision Router Table Top 24" x 32" x 1-18" thick MDF. Professionally Edgebanded MDF Top. Easy-Slide™ Micro-Dot Skin. Dual Steel Support-Struts. Heavy-Duty Construction. Supports the Largest Routers and Lifts. Co > read more

Kreg PRS1010 36 Inch Precision Router Table Fence

Published on 2011-06-12 11:42:00

Kreg PRS1010 36 Inch Precision Router Table Fence Innovative Self-Squaring T-Square Style Design. Mounts to Tables Between 3/4” and 1-1/2” Thick. Fully Enclosed Aluminum Extrusion and Full-Length. Vacuum Chamber For a Cleaner Shop. Compatible wit > read more

Kreg PRS3090 3 Inch Dual Locking Caster Set (Set of 4)

Published on 2011-06-12 11:40:00

Kreg PRS3090 3 Inch Dual Locking Caster Set (Set of 4) Add true mobility to your Universal Steel Stand. Dual-Locking mechanism protects against caster roll and pivot. > read more

Kreg MKJ Mini Jig

Published on 2011-06-11 18:02:00

Kreg MKJ Mini Jig drill guide No-fence, single-drill design allows it to be positioned in just about any location with ease. Hardened steel drill guide; glass reinforced nylon jig body. Unlimited material thickness and width. Unlimited lifetime warra > read more

Kreg MKJKIT Mini Jig Kit

Published on 2011-06-11 16:59:00

Kreg MKJKIT Mini Jig Kit Makes pocket hole joinery work easier. No-fence design makes for easy positioning. One-hole jig is great for furniture repairs or flooring work. Includes 3/8-inch step drill bit, depth collar, and Allen wrench. Handy for repa > read more

Kreg R3 Pocket Hole Jig System

Published on 2011-06-11 16:52:00

Kreg R3 Pocket Hole Jig System is an amazing repair jig with a compact design that lets you work where you need to most. Thanks to its Clamp Pad Adapter, the Jr. can be secured to the workpiece with any standard bar clamp or c-clamp. In addition, the > read more

Kreg K4 Pocket-Hole Jig

Published on 2011-06-11 16:49:00

Kreg K4 Pocket-Hole Jig patented 3-Hole Drill Guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses, without ever having to release the clamp and reposition the workpiece. Whether you're using one of K > read more

Kreg K3MS Pocket-Hole Jig

Published on 2011-06-11 16:39:00

Kreg K3MS Pocket-Hole Jig Master System takes advantage of a technique called Kreg Joinery. Unlike other techniques, Kreg Joinery requires no glue, no complicated math, and no small army of clamps to make wood joints that will last. > read more

Fein GXW Cooling Unit

Published on 2011-06-11 13:48:00

Fein GXW Cooling Unit Self contained system which minimizes coolant consumption. Used in conjuction with GXC centerless grinder. Helps improve finish with lubricant. Adds longer life to your belts thus saving you money. > read more

Fein GXR Grinding Module

Published on 2011-06-11 13:46:00

Fein GXR Grinding Module Perfect for Notching pipe or tube from 5/8 to 3 inches. Perfect fit at any angle it makes no difference whether pipes, profiles or solids the GXR is perfectly suited. Custom fit contact rollers to notch pipe from 5/8 inch all > read more

Fein GXE Deburring Machine - 400V 3PH

Published on 2011-06-11 13:40:00

Fein GXE Deburring Machine - 400V 3PH For Deburring pipes and profiles. Polishing Machine when using the appropriate polishing wheel. High Operational Reliability due to integrated saftey switch with motor protection. Broad range of Wire Brushes Avai > read more

Fein GXC Centerless Grinding

Published on 2011-06-11 13:38:00

Fein GXC Centerless Grinding System perfect for polishing or grinding pipes from 3/8 inch to 4 inches. Easy to set up with just a few adjustments to get you the perfect finish. User friendly and comes with 4 casters to make it easy to switch between > read more

Fein GX75 3 Inch x 79 Inch Belt Grinder

Published on 2011-06-11 13:36:00

Fein GX75 3 Inch x 79 Inch Belt Grinder High performance two speed belt grinder - the basis of the modular GX series. Ideal for trade use and small production runs. Ease of assembly means quick put together, quickly converted. High operational and eq > read more

Fein SCT5.40 1/4 Inch Drywall Screwdriver

Published on 2011-06-09 17:57:00

Fein SCT5.40 1/4 Inch Drywall Screwdriver is Ideal for drywall and interior construction. Quick Fein Clic-Stop clutch avoids creating disturbances when working in offices, hospitals, etc.. Included depth stop avoids damage to drywall panels and makes > read more

Fein SCS 6.3-19X 1/4 Inch Tek Screwdriver

Published on 2011-06-09 17:54:00

Fein SCS 6.3-19X 1/4 Inch Tek Screwdriver 1/4-inch capacity TEK screwdriver. 0-1900 RPMS with variable speed. Lightest on market in its class. Patented strap system makes tool feel like it part of your hand. Patented soft clutch shut off. > read more

Fein SCS 4.8-2.5 TEK 3/16 Inch Tek Screwdriver

Published on 2011-06-09 17:52:00

Fein SCS 4.8-2.5 TEK 3/16 Inch Tek Screwdriver 3/16-inch capacity TEK screwdriver 0-2500 RPM's with variable speed Lightest on market in its classPatented strap system makes tool feel like it part of your hand Patented soft clutch shut off. > read more

Fein ASQ672-1 1-1/2 Inch 4 M.T Speed Rotary Drill

Published on 2011-06-09 17:44:00

Fein ASQ672-1 1-1/2 Inch 4 M.T Speed Rotary Drill Extremely robust for heavy duty applications. Morse taper with precise rotation as a universal drill holder. High torque for driving rollers, spindles, regulators, etc. Forward/Reverse switch. > read more

Fein DSKE672 1 Inch 3 M.T. VS, 2 Speed Rotary Drill

Published on 2011-06-09 17:40:00

Fein DSKE672 1 Inch 3 M.T. VS, 2 Speed Rotary Drill Mechanical four-speed indexing gear with ideal speed grading for high torque. MT 3 holder for flexible tool use with high concentricity for optimum results. > read more

Fein DSK 658-1 2 Speed Drill

Published on 2011-06-09 15:47:00

Fein DSK 658-1 2 Speed Drill 1 inch capacity in metal with 360 RPM or 770 RPM on high. T-shaped handle with heavy duty motor and two gear selector. Comes with MT 2 shaft. > read more

Fein DDSK 672-1 1-1/4 Inch Rotary Drill

Published on 2011-06-09 14:05:00

Fein DDSK 672-1 1-1/4 Inch Rotary Drill T-shaped handle and 4-speed gear selector for heavy duty applications. 1-1/4 inch capacity in metal. Comes with MT 3 shaft. > read more

Fein DSE648 7/8 Inch Variable 2 Speed Drill

Published on 2011-06-09 14:03:00

Fein DSE648 7/8 Inch Variable 2 Speed Drill Includes 7/8-in Variable Speed Rotary Hand Drill - DSE 648, 5/8-in Quick-Action Chuck. > read more

Fein DS 648 5/8 Inch 2 Speed Drill

Published on 2011-06-09 14:00:00

Fein DS 648 5/8 Inch 2 Speed Drill 5/8 inch capacity in metal with 0-1400 RPM. 2-speed gear head with spade/"D" shaped handle. Variable speed and heavy duty motor. > read more

Fein DSEU 638 1/2 Inch Universal 2-Speed Reversible Drill

Published on 2011-06-09 13:58:00

Fein DSEU 638 1/2 Inch Universal 2-Speed Reversible Drill 1/2 inch capacity in metal with 0-2250 RPM. 2-speed gear head with Reverse. Long cord with variable speed and quick change chuck. > read more

Fein WPO 14-15E Marine Angle Polisher

Published on 2011-06-08 16:43:00

Fein WPO 14-15E Marine Angle Polisher Complete Polishing system for boat maintenance. PowerPolisher with durable gear head for high torque use. Fein High Powered Motor for long lasting life and high output. Comes with a carrying case making it easier > read more

Fein WPO 12-27E-PS 900-2700 RPM Metal Polisher Kit

Published on 2011-06-08 16:39:00

Fein WPO 12-27E-PS 900-2700 RPM Metal Polisher Kit features a variable-speed, electronically controlled, constant torque motor for uniform finishing. Easily switch from linear to rotary operation. Leveling weld seams, removing spatters, deburring, sm > read more

Fein WPO12-27E VS 5/8 X 11 Angle Polisher

Published on 2011-06-08 16:34:00

Fein WPO12-27E VS 5/8 X 11 Angle Polisher Instantaneous electronic feedback system. Unique planetary gearing system. Eliminates going over the same area. Use on stainless steel, cultured marble, etc. > read more

Fein RS 12-70E-PS Pipe Surface Polisher

Published on 2011-06-08 16:30:00

Fein RS 12-70E-PS Pipe Surface Polisher Pipe polisher with accessory selection covering coarse grinding to mirror finish. Efficient grinding of weld seams due to ideal cutting speed of the grinding belts. Variable speed for grinding, satin finishing > read more

Fein MSH 636-1 1/4 Inch Die Grinder Collet 28000 RPMS

Published on 2011-06-08 16:27:00

Fein MSH 636-1 1/4 Inch Die Grinder Collet 28000 RPMS Die grinder with high speed for difficult to reach areas. Long narrow neck allows tool to plunge deep into work pieces (e.g. grinding inside pipes). Spindle with multiple bearings for quiet operat > read more

Fein WSG 20-230 9 Inch 5/8 X 11 Angle Grinder 6000RPM

Published on 2011-06-08 16:24:00

Fein WSG 20-230 9 Inch 5/8 X 11 Angle Grinder 6000RPM features an adjustable handle which allows the user to position the tool at different angles to the work surface. > read more

Fein WSG 20-180 7 Inch 5/8X11 Angle Grinder

Published on 2011-06-08 16:21:00

Fein WSG 20-180 7 Inch 5/8X11 Angle Grinder Self start lock prevents start up after power interruption. Rear handle is adjustable so grinder can be used in any position. Includes 7-in Large Angle Grinder - WSG 20-180, Guard, Pair of Flanges, Handle, > read more

Fein WSG 12-70E-PS Variable Speed Metal Grinder

Published on 2011-06-08 16:19:00

The Fein WSG 12-70E-PS Variable Speed Metal Grinder features a variable-speed, electronically controlled, constant torque motor for uniform finishing. Easily switch from linear to rotary operation. Leveling weld seams, removing spatters, deburring, s > read more

Fein WSG 12-70E 5 Inch Variable Speed 5/8X11 Angle Grinder

Published on 2011-06-08 16:15:00

Fein WSG 12-70E 5 Inch Variable Speed 5/8X11 Angle Grinder Compact variable speed angle grinder/sander with 5/8-in - 11 spindle. High-power motor for high grinding capacity. Variable electronic speed control for constant speed and torque. Wide range > read more

Fein WSG 12-150 6 Inch Angle Grinder

Published on 2011-06-08 16:13:00

Fein WSG 12-150 6 Inch Angle Grinder Self start lock prevents tool from resarting after a power outage. Easily adjustable and removable wheel guard. Soft start for recoil-free and safe starting. > read more

Fein WSG 14-150T 6 Inch Angle Grinder Tip Start

Published on 2011-06-07 16:00:00

Fein WSG 14-150T 6 Inch Angle Grinder Tip Start Includes 6-in Compact Angle Grinder with Tip Start - WSG 14-150 T, Guard, Pair of Flanges, Handle, Wrench. > read more

Fein WSG 14-150 6 Inch Angle Grinder

Published on 2011-06-07 15:56:00

Fein WSG 14-150 6 Inch Angle Grinder Tip Start switchless angle grinder a true safety grinder when safety is a priority. Long service life due to the Fein high power motors. Less fatiguing operation due to ergonomic design. Compact, slim shape reduce > read more

Fein WSG 14-125T 5 Inch Angle Grinder - Tip Start

Published on 2011-06-07 15:53:00

Fein WSG 14-125T 5 Inch Angle Grinder - Tip Start offer a more ergonomic shape offering more comfort for long hours of grinding. An added safety feature that is on all of the new Fen angle grinders is the accidental restart lockout which alleviates a > read more

Fein WSG 14-125S 5 Inch Angle Grinder - S

Published on 2011-06-07 15:50:00

Fein WSG 14-125S 5 Inch Angle Grinder - S is the accidental restart lockout which alleviates any kickback if your angle grinder is caught in a workpiece. Fein is the expert when it comes to professional and reliable power tools and special applicatio > read more

Fein WSG 10-115T 4 1/2 Inch Angle Grinder-Tip Start

Published on 2011-06-07 15:48:00

Fein WSG 10-115T 4 1/2 Inch Angle Grinder-Tip Start offer a more ergonomic shape offering more comfort for long hours of grinding. An added safety feature that is on all of the new Fen angle grinders is the accidental restart lockout which alleviates > read more

Fein KBM 52U 2 1/16 Inch Reversible Magnetic Drill

Published on 2011-06-07 15:44:00

Fein KBM 52U 2 1/16 Inch Reversible Magnetic Drill Includes 2-1/16-in Reversible Magnetic Core Drill Press - KBM 52 U, Coolant Tank, Safety Strap, Chip Hook, 5/8-in 3-Jaw Chuck, Touch Guard, (3) QuickIN Adapters, (4) Centering Pins, Drift, Storage Bo > read more

Fein KBM 50QX 2 Inch Cap Magnetic Drill

Published on 2011-06-07 15:41:00

Fein KBM 50QX 2 Inch Cap Magnetic Drill Includes 2-1/16-in Magnetic Core Drill Press - KBM 50 QX, Coolant Pump, Safety Strap, Chip Hook, 5/8-in 3-Jaw Chuck, Touch Guard, (3) QuickIN Adapters, (4) Centering Pins, Storage Box. > read more

Fein KBM 32Q 1 1/4 Cap Inch Magnetic Drill

Published on 2011-06-07 13:34:00

Fein KBM 32Q 1 1/4 Cap Inch Magnetic Drill cutting capacity up to 1 1/16 of an inch. lightweight drill on market at 22 pounds. quick change for tooless change of cutters. comes standard with 3 jaw chuck. > read more

Fein ASGE 648 1/2 Inch Capacity Tapper

Published on 2011-06-07 13:31:00

Fein ASGE 648 1/2 Inch Capacity Tapper Head spins counterclockwise until hits material, then spins clockwise while tapping and automatically backs out of hole once pressure is released. Self enclosed tapping unit enables efficiency and speed of work. > read more

Fein ASGE 636 KIN 5/16 Inch Capacity KIN Tapper

Published on 2011-06-07 13:29:00

Fein ASGE 636 KIN 5/16 Inch Capacity KIN Tapper. The head of the tool spins counter-clockwise until it makes contact with the hole to be tapped. Then the head spins clockwise while tapping until pressure is taken off and it automatically backs the ta > read more

Fein BLS 2.5 12 Gauge Sheet Metal Shear

Published on 2011-05-31 17:49:00

Fein BLS 2.5 12 Gauge Sheet Metal Shear Robust 12 gauge sheet metal shear suitable for curves with optimum cutting speed. Fast and easy to handle when cutting flat and angled sheet metals, also ideal for stainless steel. Shear blades are indexible fo > read more

Fein BLS 1.6X 16 Gauge Sheet Metal Shear

Published on 2011-05-31 17:46:00

Fein BLS 1.6X 16 Gauge Sheet Metal Shear Convenient 16 gauge sheet metal shear suitable for cutting and trimming thin and shaped sheet metals. Compact and lightweight design ensures optimum cutting dexterity. Shear blades are indexible for economical > read more

Fein BLK 5.0 6 Gauge Sheet Metal Nibbler

Published on 2011-05-16 13:27:00

Fein BLK 5.0 6 Gauge Sheet Metal Nibbler. High-power motor for unmatched performance and durability. Cuts up to 6 gauge (3/16"). Cutting head can be rotated 90 degrees. Capable of both straight and curved cuts. Durable punch & die system. > read more

Fein BLK 3.5 10 Gauge Metal Sheet Nibbler

Published on 2011-05-16 13:23:00

Fein BLK 3.5 10 Gauge Metal Sheet Nibbler. High-power motor for unmatched performance and durability. Round die for changing cutting direction on the spot. Suitable for template cuts and notching. QuickIN change system for fast, keyless tool changes. > read more

Fein BLK 1.3CS 18 Gauge Sheet Metal Nibbler

Published on 2011-05-16 13:19:00

Fein BLK 1.3CS 18 Gauge Sheet Metal Nibbler Rotating punch - increases the punch life by 30% against fixed punch systems. High cutting speed - 7½ ft/min. Tool-free change of punch, die and cutting direction. Cutting direction adjustable in steps of > read more

Fein MOTLX 6-25 Pneumatic Caulking Cutter

Published on 2011-05-16 13:15:00

Fein MOTLX 6-25 Pneumatic Caulking Cutter This is a pneumatic oscillating tool designed for industrial use. The Fein caulking cutter removes caulking quickly and cleanly from expansion joints and facades. It removes sealant from bathroom tile or marb > read more

Fein FSC 2.0Q-TS Super Cut Tile Set

Published on 2011-05-16 13:13:00

The Fein FSC 2.0Q-TS Super Cut Tile Set is a unique, premium performance system for building and renovation. Fast, strong, versatile and durable, it not only makes your work go 350% faster, it meets the toughest tool demands. Exceptional know-how, th > read more

Fein FSC 2.0Q-MS Super Cut Marine Set

Published on 2011-05-15 16:36:00

Fein FSC 2.0Q-MS Super Cut Marine Set is a unique, premium performance system for building and renovation. Fast, strong, versatile and durable, it not only makes your work go 350% faster, it meets the toughest tool demands. Exceptional know-how, that > read more

Fein FSC 2.0Q-IS Super Cut Interior Set

Published on 2011-05-15 16:34:00

Fein FSC 2.0Q-IS Super Cut Interior Set is a unique, premium performance system for building and renovation. Fast, strong, versatile and durable, it not only makes your work go 350% faster, it meets the toughest tool demands. Exceptional know-how, th > read more

Fein FSC 2.0Q-FS Super Cut Flooring Set

Published on 2011-05-15 16:32:00

Fein FSC 2.0Q-FS Super Cut Flooring Set The Fein SuperCut is a unique, premium performance system for building and renovation. Fast, strong, versatile and durable, it not only makes your work go 350% faster, it meets the toughest tool demands. Except > read more

Fein FSC 2.0Q-CS Supercut Caulking Set

Published on 2011-05-11 17:13:00

Fein FSC 2.0Q-CS Supercut Caulking Set Quick In system for fast and reliable blade change. High Powered Motor for up to 350% faster working results. Complete systems for many different professions. 40 years of experience in the oscillating power tool > read more

Fein FSC 2.0Q BASIC Super Cut Set with Case

Published on 2011-05-11 17:09:00

Fein FSC 2.0Q BASIC Super Cut Set with Case. Quick In system for fast and reliable blade change. High Powered Motor for up to 350% faster working results. Complete systems for many different professions. 40 years of experience in the oscillating powe > read more

Fein STS 325R 2-3/8 Inch Pneumatic Hacksaw

Published on 2011-05-10 15:49:00

Fein STS 325R 2-3/8 Inch Pneumatic Hacksaw this saw is for pipes and profiled sections. Ideally suited for cutting pipes and profiles made of steel, cast-iron, autoclaved aerated concrete, and plastics. Clamp and feed device available for profiles an > read more

Fein ASTXE 649 Variable Speed Hacksaw

Published on 2011-05-10 15:45:00

Fein ASTXE 649 Variable Speed Hacksaw Ideal for trimming pipe and profile steel. Suitable for steel, cast iron, concrete & plastic. Fein ASTXE 649 Hacksaw Specifications:Model: ASTXE 649 Input Watts: 750 Output Watts: 480 Strokes/min: 100 - 350 B > read more

Fein ASTX 649 Hacksaw 24 Inch OD Max Cut

Published on 2011-05-10 15:40:00

Fein ASTX 649 Hacksaw 24 Inch OD Max Cut.Powerful hacksaw for pipes and profiled sections. Ideally suited for cutting pipes and profiles made of steel, cast-iron, autoclaved aerated concrete, and plastics. Clamp and feed device available for profiles > read more

Fein MSF 636-1 6 Inch Random Orbit Sander

Published on 2011-05-10 15:36:00

Fein MSF 636-1 6 Inch Random Orbit Sander. Includes 6-in Dust-Free Random Orbit Sander - MSF 636-1, 6-in Eccentric Head, 6-in Medium Backing Pad, Protective Suction Hood, Wrench Set Fein MSF 636-1 Random Orbit Sander Specifications:Model: MSf 636-1 I > read more

Fein MOL 1200E 8 Inch Random Orbit Sander

Published on 2011-05-10 15:31:00

Fein MOL 1200E 8 Inch Random Orbit Sander. Instantaneous electronic feedback system maintains constant RPM. Covers 78% more surface area than a standard 6 in. sander. 1200 watt, 7000 no load RPM. Hook & loop with dust extraction. Built in dust co > read more

Fein FSS 12-27E-6 Variable Speed 6 Inch Rotary Sander

Published on 2011-05-10 15:28:00

Fein FSS 12-27E-6 Variable Speed 6 Inch Rotary Sander can accommodate right or left handed operators. The handle can be placed on either side. The power switch is located where it can be used by either hand. Fein FSS 12-27E-6 Rotary Sander Specificat > read more

Fein FMM 250Q TOP Variable Speed Oscillating Tool Kit

Published on 2011-05-10 15:23:00

Fein FMM 250Q TOP Variable Speed Oscillating Tool Kit, a versatile, high-precision specialist tool that's perfect for professional outfitting, renovation, and repair work. Its lightweight, ergonomic design, and powerful 250-watt motor with electronic > read more

Fein FMM 250Q SELECT Variable Speed Oscillating Tool Set

Published on 2011-05-10 13:43:00

Fein FMM 250Q SELECT Variable Speed Oscillating Tool Set The FMM 250Q comes with several high-quality accessories, including one Fein 63502151018 Universal E-Cut Blade that's great for doorjambs, baseboards, baseboards, toe kicks, and flooring work. > read more

Fein FMM 250Q BASIC Multimaster Variable Speed Tool

Published on 2011-05-10 13:37:00

Fein FMM 250Q BASIC Multimaster Variable Speed Tool, high-precision specialist tool that's perfect for professional outfitting, renovation, and repair work. Its lightweight, ergonomic design, and powerful 250-watt motor with electronic speed control, > read more

Fein MSX 315 VELCRO Cordless MultiMaster Oscillating Tool

Published on 2011-05-10 13:30:00

Fein MSX 315 VELCRO Cordless MultiMaster Oscillating Tool The battery-operated Fein Multimaster ACCU offers all the versatility of the Fein Multimaster. The 9.6v rechargeable batteries are designed to ensure long life, and the ACCU's highly efficient > read more

Tanaka TCP-210 21 cc Water Pump

Published on 2011-05-09 16:48:00

The Tanaka TCP-210 21 cc Water Pump Great for draining ponds, pools, and basements. In addition, it comes standard with a garden hose adapter for lawn watering. 21 cc, 1.1 h.p. two-stroke engine 1,900 GPH max discharge 1" port diameter Two-year comm > read more

Tanaka TEA-500 50 cc Two-man Post Hole Digger

Published on 2011-05-09 16:43:00

The Tanaka TEA-500 50 cc Two-man Post Hole Digger provides maximum operator safety and comfort for larger digging jobs. Weighing only 37 lbs., this heavy-duty post hole digger can take up to a 12" earth auger bit. 50 cc, 2.5 h.p. Tanaka two-stroke e > read more

Tanaka TIA-350PFS 32 cc One-man Post Hole Digger

Published on 2011-05-09 16:38:00

The Tanaka TIA-350PFS 32 cc One-man Post Hole Digger Lightweight and easy to start, this one-man post hole digger is ideal for installing fence posts, decks, planting trees and shrubs, ice fishing, and more. 32 cc, 1.6 h.p. two-stroke engine S-Start > read more

Tanaka TED-270PFR 27cc Gas Powered Drill

Published on 2011-05-09 16:32:00

The Tanaka TED-270PFR 27cc Gas Powered Drill features a more powerful 27 cc, 1.4 h.p. PureFire engine and several safety and comfort improvements. 27 cc, 1.4 h.p. PureFire two-stroke engine 20:1 gear reduction Powered reversing feature Dual position > read more

Tanaka TED-270PFHS 27 cc Gas Powered High Speed Coring Drill

Published on 2011-05-09 16:29:00

The Tanaka TED-270PFHS 27 cc Gas Powered High Speed Coring Drill Ideal for fencing, security, plumbing, HVAC, road, sewer, steel, electrical, highway installation/maintenance, repair, and inspection. Sold w/out chuck (order #16066) or wet kit (order > read more

Tanaka TPS-260PF 25 cc Power Tree Pruner

Published on 2011-05-09 16:26:00

The Tanaka TPS-260PF 25 cc Power Tree Pruner Easily remove dead branches, eliminate hazards, or remove crowded limbs with the Tanaka TPS-260PF pole saw. The TPS-260PF power tree pruner cuts branches up to 8" in diameter and features a lifetime drive > read more

Tanaka ECV-5601/20 50 cc Rear Handle Chain Saw

Published on 2011-05-09 16:22:00

The Tanaka ECV-5601/20 50 cc Rear Handle Chain Saw provides maximum power for firewood and farm use. 50 cc, 3.6 h.p. two-stroke engine 20" bar and chain, .325" pitch Six-point anti-vibration system Two-year commercial use warranty / Seven-year consu > read more

Tanaka ECV-4501/20 43 cc Rear Handle Chain Saw

Published on 2011-05-09 16:18:00

The Tanaka ECV-4501/20 43 cc Rear Handle Chain Saw Professional mid-range chain saw. Ideal for firewood cutting. 43 cc, 2.5 h.p. two-stroke engine 16", 18", or 20" bar and chain, .325" pitch Four point anti-vibration system Two-year commercial use w > read more

Tanaka ECV-4501/18 43 cc Rear Handle Chain Saw

Published on 2011-05-09 16:14:00

The Tanaka ECV-4501/18 43 cc Rear Handle Chain Saw Professional mid-range chain saw. Ideal for firewood cutting. 43 cc, 2.5 h.p. two-stroke engine 16", 18", or 20" bar and chain, .325" pitch Four point anti-vibration system Two-year commercial use w > read more

Tanaka ECV-4501 43 cc Rear Handle Chain Saw

Published on 2011-05-09 16:09:00

The Tanaka ECV-4501 43 cc Rear Handle Chain Saw Professional mid-range chain saw. Ideal for firewood cutting. 43 cc, 2.5 h.p. two-stroke engine 16", 18", or 20" bar and chain, .325" pitch Four point anti-vibration system Two-year commercial use warr > read more

Tanaka TPE-260PF Stick Edger Trimmer 25 cc, 1.3 h.p. PureFire Two-Stroke Engine

Published on 2011-05-08 13:15:00

The Tanaka TPE-260PF Stick Edger Trimmer 25 cc, 1.3 h.p. PureFire Two-Stroke Engine. After you have used the Tanaka TLE-600 to establish a nice edge, grab the Tanaka TPE-260PF stick edger to quickly and easily maintain a nice, clean edge throughout t > read more

Tanaka HTS-2530PF Hedge Trimmer 24 cc, 1.3 h.p. PureFire Two-Stroke Engine

Published on 2011-05-08 13:10:00

The Tanaka HTS-2530PF Hedge Trimmer 24 cc, 1.3 h.p. PureFire Two-Stroke Engine Ideal for sculpting hedges, the HTS-2530PF is powered by Tanaka's PureFire low emission engine and features 30" single-sided blades. 24 cc, 1.3 h.p. PureFire two-stroke e > read more

Tanaka THT-2100 Hedge Trimmer 21 cc, 1.1 h.p. Two-Stroke Engine

Published on 2011-05-08 13:06:00

The Tanaka THT-2100 Hedge Trimmer 21 cc, 1.1 h.p. Two-Stroke Engine. Entry level commercial unit features 22" blades and a fixed-position rear handle. 21 cc, 1.1 h.p. two-stroke engine 22" double-sided, dual reciprocating blades Easily cut branches > read more

Tanaka THT-2000 Commercial Grade Gas Powered Hedge Trimmer

Published on 2011-05-06 15:50:00

The Tanaka THT-2000 Commercial Grade Gas Powered Hedge Trimmer Ideal for homeowner and light-duty commercial use, it features added safety protection on the blades. 21 cc, 1.1 h.p. two-stroke engine 20" double-sided, dual reciprocating blades Easily > read more

Tanaka SF-PE Edger Attachment

Published on 2011-05-06 15:45:00

The Tanaka SF-PE Edger Attachment. Get Smart! Turn your Tanaka split-boom grass trimmer into a portable edger! 8" cutting blade 3" cutting depth 6" solid rubber wheel 33" overall length Tanaka SF-PE Edger Attachment Specifications:DRIVE SYSTEM Dri > read more

Tanaka SF-PS Power Tree Pruner Attachment

Published on 2011-05-06 15:42:00

The Tanaka SF-PS Power Tree Pruner Attachment Get Smart! Turn your Tanaka split-boom grass trimmer into a pole saw! Lifetime drive shaft warranty. 10" Oregon bar & chain Crankshaft driven, adjustable, automatic oiling system Solid steel drive sh > read more

Tanaka SF-HT Pole Hedge Trimmer Attachment

Published on 2011-05-06 15:38:00

The Tanaka SF-HT Pole Hedge Trimmer Attachment. Get Smart! Turn your Tanaka split-boom grass trimmer into a pole hedge trimmer! Lifetime drive shaft warranty. 22" Double-sided blades Blades articulate up to 130 degrees Solid steel drive shaft 55" ov > read more

Tanaka TBC-255SFK 3-in-1 Professional Yard Maintenance Trimmer Kit

Published on 2011-05-06 15:36:00

The Tanaka TBC-255SFK 3-in-1 Professional Yard Maintenance Trimmer Kit. Get Smart! Quickly and easily turn this commercial powerhead into a grass trimmer, pole saw, and stick edger with Tanaka's new 3-in-1 professional yard maintenance kit. 25 cc, 1 > read more

Tanaka TBC-260SF Split Shaft Grass Trimmer 25 cc, 1.3 h.p. PureFire Two-Stroke Engine

Published on 2011-05-06 15:31:00

The Tanaka TBC-260SF Split Shaft Grass Trimmer 25 cc, 1.3 h.p. PureFire Two-Stroke Engine. Quickly and easily turn this trimmer into a pole saw, edger, pole hedge trimmer, mini-cultivator, or power sweeper. Lifetime drive shaft warranty. 25 cc, 1.3 > read more

Tanaka TBC-240SFS Split-shaft Grass Trimmer Brush Cutter 23 cc, 1.2 h.p. PureFire Two-Stroke Engine

Published on 2011-05-06 15:28:00

The Tanaka TBC-240SFS Split-shaft Grass Trimmer Brush Cutter 23 cc, 1.2 h.p. PureFire Two-Stroke Engine. Quickly and easily turn this trimmer into a pole saw, edger, pole hedge trimmer, mini-cultivator, or brush cutter. The TBC-240SFS features S-Star > read more

Tanaka TCG22EADSLP 21.1cc 2-Stroke Gas Powered Straight Grass Trimmer

Published on 2011-05-06 15:24:00

The Tanaka TCG22EADSLP 21.1cc 2-Stroke Gas Powered Straight Grass Trimmer. 21.1cc Commercial grade 2 stroke engine provides excellent performance and reliability Split-Shaft design allows for the use of optional attachments S-Start reduces the amoun > read more

Tanaka TPS-210 Power Tree Pruner Attachment

Published on 2011-05-05 15:33:00

The Tanaka TPS-210 Power Tree Pruner Attachment Quickly and easily turn your straight shaft grass trimmer into a pole saw. 10" Oregon bar & chain Automatic, adjustable, crankshaft driven oiler Fits Tanaka straight shaft trimmers 21cc to 32 cc S > read more

Tanaka TPH-210 Hedge Trimmer Attachment

Published on 2011-05-05 15:29:00

The Tanaka TPH-210 Hedge Trimmer Attachment Quickly and easily turn your straight shaft grass trimmer into a articulating hedge trimmer for reaching tall hedges or tough ground cover. 22" double-sided, dual reciprocating blades 130 degree pivoting a > read more

Tanaka TMC-200 Mini-Cultivator Attachment

Published on 2011-05-05 15:26:00

The Tanaka TMC-200 Mini-Cultivator Attachment Quickly and easily turn your straight shaft grass trimmer into a mini-cultivator for quick garden / flower bed weeding. Dig 4" wide and 6" deep 49:1 gear reduction Fits Tanaka straight shaft trimmers 21c > read more

Tanaka TBC-600 Dual Handle Brush Cutter Trimmer 47 cc, 2.4 h.p. Two-Stroke Engine

Published on 2011-05-05 15:21:00

The Tanaka TBC-600 Dual Handle Brush Cutter Trimmer 47 cc, 2.4 h.p. Two-Stroke Engine is a powerful clearing saw for forestry, farm or municipal use. Comes standard with deluxe shoulder harness, BRAIN® fully automatic cutting head, and saw blade. Li > read more

Tanaka TBC-430PF Dual Handle Brush Cutter 40 cc, 2.2 h.p. PureFire Two-Stroke Engine

Published on 2011-05-05 15:18:00

The Tanaka TBC-430PF Dual Handle Brush Cutter 40 cc, 2.2 h.p. PureFire Two-Stroke Engine. is powerful, fuel efficient, and low emission brush cutter for heavy-duty clearing jobs. Lifetime drive shaft warranty, blade ready, attachment capable, Walbro > read more

Tanaka TBC-340PFD Dual Handle Brush Cutter Trimmer 32 cc, 1.6 h.p. PureFire Two-Stroke Engine

Published on 2011-05-05 15:09:00

The Tanaka TBC-340PFD Dual Handle Brush Cutter Trimmer 32 cc, 1.6 h.p. PureFire Two-Stroke Engine comes standard with a cutting head and blade, has a lifetime drive shaft warranty, and contains a Walbro carburetor with primer for fast and reliable st > read more

Tanaka TBC-340PF Trimmer Brush Cutter 32 cc, 1.6 h.p. PureFire Two-Stroke Engine

Published on 2011-05-05 15:06:00

The Tanaka TBC-340PF Trimmer Brush Cutter 32 cc, 1.6 h.p. PureFire Two-Stroke Engine For professionals who demand a lightweight trimmer in the 30cc range. The Tanaka TBC-340PF is powerful, fuel efficient, and low emissions. Lifetime drive shaft warra > read more

Tanaka TBC-260PFL Extended Reach Trimmer Brush Cutter 25 cc, 1.3 h.p. PureFire Two-Stroke Engine

Published on 2011-05-05 13:50:00

The Tanaka TBC-260PFL Extended Reach Trimmer / Brush Cutter 25 cc, 1.3 h.p. PureFire Two-Stroke Engine has the only trimmer on the market designed just for you! With a 71" drive shaft, the Tanaka TBC-260PFL has a lifetime drive shaft warranty, is bla > read more

Tanaka TBC-280PFT Grade 27cc 1.4 HP Two-Stroke Gas Powered Grass Trimmer / Brush Cutter

Published on 2011-05-05 13:45:00

The Tanaka TBC-280PFT Grade 27cc 1.4 HP Two-Stroke Gas Powered Grass Trimmer / Brush Cutter. 27 cc, 1.4 h.p. PureFire two-stroke engine Solid steel drive shaft Padded "D" handle Two-year commercial use warranty / Three-year consumer use warranty We > read more

Tanaka TBC-280PF Grass Trimmer Brush Cutter 27 cc, 1.4 h.p. PureFire Two-Stroke Engine

Published on 2011-05-05 13:40:00

The Tanaka TBC-280PF Grass Trimmer / Brush Cutter 27 cc, 1.4 h.p. PureFire Two-Stroke Engine. 12.8 lbs. + 1.4 h.p. = The Power-to-Weight Champion! This 27 cc trimmer is a commercial cutter's dream and features a lifetime drive shaft warranty, is blad > read more

Tanaka TCG22EASSLP 21 cc Curved Shaft Trimmer, Tap Head

Published on 2011-05-04 17:22:00

The Tanaka TCG22EASSLP 21 cc Curved Shaft Trimmer, Tap Head. 21.1cc Commercial grade 2 stroke engine provides excellent performance and reliability S-Start reduces the amount of pull-force required to start the unit by 50% Solid Steel Drive Shaft pr > read more

Campbell Hausfeld WS099001AV 115V Arc/Stick Welder

Published on 2011-05-04 17:07:00

The Campbell Hausfeld WS099001AV 115V Arc/Stick Welder. This 115V, 20 Amp input, 70 Amp AC output arc welder features a metal design that allows easy interaction with controls. The transformer design provides an easier start and smoother arc. Preset > read more

Campbell Hausfeld WG206000AV MIG/Flux Core Wire Feed Welder

Published on 2011-05-04 17:04:00

The Campbell Hausfeld WG206000AV MIG/Flux Core Wire Feed Welder With 115 Volt, 70 Amp DC output, 20 Amp input and built-in gas liner and valve, this welder is MIG ready and requires no additional parts. Thermal overload protection automatically shuts > read more

Campbell Hausfeld WF215001AV 115V MIG/Flux Wire Feed Welder

Published on 2011-05-04 17:02:00

The Campbell Hausfeld WF215001AV 115V MIG/Flux Wire Feed Welder. This welder has four heat settings to match your metal thickness. Welds steel up to 3/16 inches thick. Professional torch is equipped with trigger activated arc for easy start. The weld > read more

Campbell Hausfeld TL050499AV Dual Action Sander with Storage Case

Published on 2011-05-04 16:58:00

The Campbell Hausfeld TL050499AV Dual Action Sander with Storage Case. Tackle your auto sanding projects faster and easier with this Dual Action Sander. Use it for sanding body filler, fiberglass, metal and wood. The soft urethane pad provides more c > read more

Campbell Hausfeld PL150499AV 6 Inch Dual Action Sander

Published on 2011-05-04 16:56:00

The Campbell Hausfeld PL150499AV 6 Inch Dual Action Sander. 10,000 RPMs, dual action sanding for swirl-free finishes. This tool is designed for sanding wood, metal, fiberglass and autobody fillers. Soft Santoprene elastomer grip provides increased co > read more

Campbell Hausfeld AT125102AJ 30 lb. Capacity Sandblaster

Published on 2011-05-04 16:21:00

The Campbell Hausfeld AT125102AJ 30 lb. Capacity Sandblaster. Includes ceramic nozzle. Requires 9.0 SCFM at 90 PSI; 125 PSI maximum. Great for removing rust and old paint from automobiles and furniture Portable design with shoulder strap Campbell Ha > read more

Campbell Hausfeld AT121102AJ 120 lb. Capacity Sandblaster

Published on 2011-05-04 16:19:00

The Campbell Hausfeld AT121102AJ 120 lb. Capacity Sandblaster. Hopper holds 120 lbs. of abrasive for approximately 200 minutes of blasting. Wheels provide added mobility. Includes gun with ceramic nozzle, material hose, hopper, and wheels. 9.0 avg. S > read more

Campbell Hausfeld PL1565 5 Inch Random Orbit Sander

Published on 2011-05-04 16:16:00

The Campbell Hausfeld PL1565 5 Inch Random Orbit Sanderis ideal for sanding wood, body filler, fiberglass, metal and other surfaces. Swirl-free, efficient fine finish sanding. 11.6 avg. SCFM requirement at 90 PSI. 10,000 RPMs Swirl-free, finish sand > read more

Campbell Hausfeld AT122601AV Sandblasting Kit

Published on 2011-05-04 16:11:00

The Campbell Hausfeld AT122601AV Sandblasting Kit. Siphon feed design sprays most abrasives including glass beads, aluminum oxide, steel grit, silicon carbide, walnut shells and more. Easily removes rust, scale, and paint from parts and small equipme > read more

Campbell Hausfeld PS231B 1/2 Hp, 0.28 gpm Cart Mounted Airless Paint Sprayer

Published on 2011-05-03 13:52:00

The Campbell Hausfeld PS231B 1/2 Hp, 0.28 gpm Cart Mounted Airless Paint Sprayer Ideal for spraying large surfaces quickly, such as house exterior, fences, sheds. System delivers 0.28 gallons per minute at 2000 psi. Packaged complete with 25 foot hos > read more

Campbell Hausfeld CHN70899 Precision Guided 3.5 Inch 34 Degree Framing Nailer

Published on 2011-05-03 13:49:00

The Campbell Hausfeld CHN70899 Precision Guided 3.5 inch 34 Degree Framing Nailer. This Precision Guided 3.5 inch Framing Nailer is ideal for building decks, fences and constructing framework. It is packed with unique features to help you work faster > read more

Campbell Hausfeld NS219099AV 3-1/2 inch Round-Head Framing Nailer Kit

Published on 2011-05-03 13:46:00

The Campbell Hausfeld NS219099AV 3-1/2 inch Round-Head Framing Nailer Kit. This kit allows you to easily change the direction of exhaust and control the depth of drive in various types of wood and engineered lumber. The removable non-marring tip is u > read more

Campbell Hausfeld NS349099 3-1/2 Inch Clipped-Head Framing Nailer Kit

Published on 2011-05-03 13:44:00

Campbell Hausfeld NS349099 3-1/2 Inch Clipped-Head Framing Nailer Kit with an adjustable exhaust and depth control, this nailer easily change the direction of exhaust and controls the depth of drive in various types of wood and engineered lumber. The > read more

Campbell Hausfeld CHN70699 Precision Guided 2.5 Inch 35 Degree Finish Nailer

Published on 2011-05-03 13:40:00

The Campbell Hausfeld CHN70699 Precision Guided 2.5 Inch 35 Degree Finish Nailer. Air powered nailers save you time on the job, compared to using traditional hammer and nails. Try this new Precision Guided 2.5 inch Finish Nailer for your next finish > read more

Campbell Hausfeld CHN50399AV 2-in-1 Flooring Nailer/Stapler Kit

Published on 2011-05-03 13:38:00

The Campbell Hausfeld CHN50399AV 2-in-1 Flooring Nailer/Stapler Kit. Now you can upgrade your home by adding the beauty and warmth of hardwood flooring. This quality engineered flooring nailer makes the task of installing flooring faster and easier. > read more

Campbell Hausfeld CHN70299 Precision-Guided 2 Inch Brad Nailer

Published on 2011-05-03 13:36:00

The Campbell Hausfeld CHN70299 Precision-Guided 2 Inch Brad Nailer. Air powered nailers save you time on the job, compared to using traditional hammer and nails. This new Precision Guided 2 inch Brad Nailer is ideal for finishing your finish and trim > read more

Campbell Hausfeld CHN10499AV 2-in-1 Nailer/Stapler Kit

Published on 2011-05-03 13:33:00

The Campbell Hausfeld CHN10499AV 2-in-1 Nailer/Stapler Kit (18 Gauge). Drives both 18 gauge brad nails and 1/4 inch crown staples, 1/2 inch to 1-1/4 inch length. Control the depth of drive in various types of wood. Quickly remove nail jams to reduce > read more

Campbell Hausfeld CC2410 Cordless Rechargeable Inflator with Light

Published on 2011-05-02 17:01:00

This Campbell Hausfeld CC2410 portable, cordless inflator is perfect for camping, road trips and overall auto safety. Use it to inflate tires, air mattresses and other recreational equipment. Charge it either in your home, using the 120 volt charger, > read more

Campbell Hausfeld RP420050AV 120 volt Digital Home Inflation System

Published on 2011-05-02 16:58:00

The Campbell Hausfeld RP420050AV 120 volt Digital Home Inflation System. Inflate your tires and sports balls faster and easier with this innovative 120 volt inflation system. This inflator is ideal for inflating car, bike, minivan, and motorcyle tire > read more

Campbell Hausfeld RP330000AV 12 Volt Digital Tire Inflation System

Published on 2011-05-02 16:55:00

The Campbell Hausfeld RP330000AV 12 Volt Digital Tire Inflation System. Proper tire inflation saves you time and money, and this handy 12 volt unit makes it even easier. This inflator is ideal for inflating car, minivan, motorcyle and bike tires, as > read more

Campbell Hausfeld RP410000AV 120 Volt Inflator with Gauge

Published on 2011-05-02 16:53:00

The Campbell Hausfeld RP410000AV 120 Volt Inflator with Gauge Convenient carry handle for on the go portability. Fast, easy inflation of high-pressure items such as tires and sporting equipment. Cooling fan gives extended unit life and reliability. B > read more

Campbell Hausfeld RP320000AV 12 volt Tire Inflator with Safety Light

Published on 2011-05-02 16:50:00

This Campbell Hausfeld RP320000AV 12 volt Tire Inflator is ideal for roadside emergencies. It comes with a bright safety light to help with nighttime inflation. Its portable design makes it easy to store in your trunk. The inflator operates on a 12 v > read more

Campbell Hausfeld VT471400AJ Compressor Pump

Published on 2011-05-02 16:45:00

The Campbell Hausfeld VT471400AJ Compressor Pump. 2 Cylinder, Cast Iron, splash lube compressor pump. Rates as the quietest operator compared to competitive oil-lubricated aluminum pumps. 1-stage. Up to 10.3 SCFM. Easy to change filter for clean int > read more

Campbell Hausfeld VT2030 Compressor with Flywheel

Published on 2011-05-02 16:43:00

The Campbell Hausfeld VT2030 Compressor with Flywheel. This compressor handles a 3 running HP motor and is constructed with a cast iron, two cylinder, oil-lubricated pump configuration. It rates as the quietest operator compared to competitive oil-lu > read more

Campbell Hausfeld FP260200AV 2 Gallon Air Compressor with Inflation Kit

Published on 2011-05-02 16:39:00

Campbell Hausfeld FP260200AV 2 Gallon Air Compressor with Inflation Kit. Here is an ideal kit for all your inflation projects. Use the compact, portable compressor to inflate car and truck tires, rafts, sports balls, and bikes. Its max 125 PSI provid > read more

Campbell Hausfeld FP260000AV 1 Gallon Air Compressor with Inflation Kit

Published on 2011-05-02 15:27:00

The Campbell Hausfeld FP260000AV 1 Gallon Air Compressor with Inflation Kit. Finish a wide variety of inflation and home projects with this one compressor kit. Use the compact, portable compressor to inflate car and truck tires, sports balls, and bik > read more

Campbell Hausfeld HM750099AV 6 Gallon Air Compressor

Published on 2011-05-02 15:09:00

The Campbell Hausfeld HM750099AV Inflation and Fastening 6 Gallon Air Compressor with Tire Inflation Kit. Finish over 30 inflation and fastening projects faster and easier with this 6 gallon Air Compressor Kit. This compressor is ideal for inflating > read more

Chicago Pneumatic CP835 Heavy Duty Nibbler

Published on 2011-05-01 16:45:00

The Chicago Pneumatic CP835 Heavy Duty Nibbler. Rugged head and 1.77" diameter punch cuts steel up to .060" (16 gauge) and aluminium up to .102(10 gauge) Easy access to punch and die for quick replacement Lever throttle for low speed starting 4 opti > read more

Chicago Pneumatic CP785S Heavy Duty Pistol Shear

Published on 2011-05-01 16:43:00

The Chicago Pneumatic CP785S Heavy Duty Pistol Shear. Powerful efficient 0.5 hp (370W) motor to cut up to 18 gauge steel (1,1mm - 0.04'') Triple idler planetary gearing Ergonomic handle design Benefits Smooth operation and extented life Operator com > read more

Chicago Pneumatic CP873K Low Speed Tyre Buffer Kit

Published on 2011-05-01 16:41:00

The Chicago Pneumatic CP873K Low Speed Tyre Buffer Kit. Adjustable speed control Qucik change slip chuck Lock off throttle to prevent accidental start up Rear exhaust Kit includes: whip hose and exhaust hose Benefits Most popular ryre buffer in the > read more

Chicago Pneumatic CP873 Low Speed Tyre Buffer

Published on 2011-05-01 16:38:00

The Chicago Pneumatic CP873 Low Speed Tyre Buffer. Adjustable speed control Qucik change slip chuck Lock off throttle to prevent accidental start up Rear exhaust Benefits Most popular ryre buffer in the market Fast and easy change of buffing wheel I > read more

Chicago Pneumatic CP871 High Speed Tyre Buffer

Published on 2011-05-01 16:35:00

The Chicago Pneumatic CP871 High Speed Tyre Buffer. Adjustable speed control Jacob's quality 3/8" (10mm) chuck for holding buffing accessories Lock off throttle to prevent accidental start up Rear exhaust Benefits Ideal for patchwork, roughing areas > read more

Chicago Pneumatic CP861 Heavy Duty High Speed Cutter

Published on 2011-05-01 16:33:00

The Chicago Pneumatic CP861 Heavy Duty High Speed Cutter. Rugged, energy efficient 0,5hp (370W) motor Lightweight tool: 1,63 lbs (0,74kg) Square handle design for positive grip Safety lever to prevent accidental start up Benefits Powerful, durabilit > read more

Chicago Pneumatic CP874 Standard Duty Speed Cutter

Published on 2011-05-01 16:31:00

The Chicago Pneumatic CP874 Standard Duty High Speed Cutter. Wheel diameter 3" (75mm) Adjustable speed regulator Safety lever to prevent accidental start up Rear exhaust Benefits Precise and safe control Ideal for cutting through composite, sheet me > read more

Chicago Pneumatic CP881 Heavy Duty Reciprocating Saw

Published on 2011-05-01 16:27:00

The Chicago Pneumatic CP881 Heavy Duty Reciprocating Saw. Power and speed of 9,500 strokes per minute Heavy duty construction Adjustable guard guide Comfortable rubber grip Includes 32T saw blade (1) Benefits Cut through material with ease Powerful > read more

Chicago Pneumatic CP7900 Standard Duty Reciprocating Saw

Published on 2011-05-01 16:23:00

The Chicago Pneumatic CP7900 Standard Duty Reciprocating Saw. Ergonomic design and Composite housing handle Adjustable guard guide 10mm stroke length Includes: one each 18T, 28T, 32T replacement blades Benefits Compact and lightweight Ideal tool for > read more

Chicago Pneumatic CP7901K Heavy Duty Reciprocating Saw Kit

Published on 2011-05-01 16:21:00

The Chicago Pneumatic CP7901K Heavy Duty Reciprocating Saw Kit. Low vibration 10mm stroke length Great power and speed of 10,000 strokes per minute 360° swivel air inlet Kit includes: heavy duty saw, five each 18T, 24T, 32T blades, swivel inlet in > read more

Chicago Pneumatic CP7250 6 Inch Random Orbital Sander

Published on 2011-04-30 16:12:00

The Chicago Pneumatic CP7250 6 Inch Random Orbital Sander. Strongest sander available at .3hp (210w) for unmatched sanding power True oil free operation to keep contaminants away from your sanding process Non-vacuum model available in PSA and Hook & > read more

Chicago Pneumatic CP7220 Random Orbital Palm Sander

Published on 2011-04-30 15:55:00

The Chicago Pneumatic CP7220 Random Orbital Palm Sander. Strongest sander available at .3hp (210w) for unmatched sanding power True oil free operation to keep contaminants away from your sanding process Non-vacuum model available in PSA and Hook &am > read more

Chicago Pneumatic CP9780 Heavy Duty Belt Sander 3/4 Inch (20mm) Capacity

Published on 2011-04-30 15:52:00

The Chicago Pneumatic CP9780 Heavy Duty Belt Sander 3/4 Inch (20mm) Capacity. Quick change belt replacement Adjustable sanding arm Handle exhaust and swivel air inlet Rubber molded grip Benefits Oprator comfort Excellent for paint removal, weld sand > read more

Chicago Pneumatic CP9779 Heavy Duty Belt Sander 3/8 Inch (10mm) Capacity

Published on 2011-04-30 15:50:00

The Chicago Pneumatic CP9779 Heavy Duty Belt Sander 3/8 Inch (10mm) Capacity. Quick change belt replacement Adjustable sanding arm Handle exhaust and swivel air inlet Rubber molded grip Benefits Oprator comfort Excellent for paint removal, weld sand > read more

Chicago Pneumatic CP9778 Standard Duty Hi-Speed Sander with 5 Inch (125mm) Pad

Published on 2011-04-30 15:48:00

The Chicago Pneumatic CP9778 Standard Duty Hi-Speed Sander with 5 Inch (125mm) Pad. Built in air regulator and variable speed throttle Rugged, energy efficient 0.5 hp (370W) motor Low vibration Benefits Ideal compact tool for small jobs and difficul > read more

Chicago Pneumatic CP7202 Mini Pistol Disc Sander with 3 Inch (75mm) Roloc Pad

Published on 2011-04-30 15:45:00

The Chicago Pneumatic CP7202 Mini Pistol Disc Sander with 3 Inch (75mm) Roloc Pad. Rubber molded pistol grip Adjustable power regulator Two finger progressive throttle Silence handle exhaust Benefits Compact & lightweight Maximize operator contr > read more

Chicago Pneumatic CP7202D Mini Pistol Disc Sander with 3 Inch (75mm) Roloc Pad

Published on 2011-04-30 15:43:00

The Chicago Pneumatic CP7202D Mini Pistol Disc Sander with 3 Inch (75mm) Roloc Pad. Rubber molded pistol grip Adjustable power regulator Two finger progressive throttle Silence handle exhaust Includes: (1) 3" (75mm) backing pad (10) 3" (75mm) 80, 10 > read more

Chicago Pneumatic CP7201 Mini Disc Polisher 3 Inch (75mm) Hook & Loop pad

Published on 2011-04-30 15:40:00

The Chicago Pneumatic CP7201 Mini Disc Polisher 3 Inch (75mm) Hook & Loop pad. Powerful, resist to stalls Rubber molded pistol grip Adjustable power regulator Two finger progressive throttle Silence handle exhaust Benefits Compact and lightweigh > read more

Chicago Pneumatic CP7200 Mini Pistol Random Orbital Sander

Published on 2011-04-30 15:37:00

The Chicago Pneumatic CP7200 Mini Pistol Random Orbital Sander. Rubber molded pistol grip Adjustable power regulator Two finger progressive throttle Muffled handle exhaust Benefits Compact & lightweight Maximize operator control and ergonomic, l > read more

Chicago Pneumatic CP7200S Mini Pistol Random Orbital Sander

Published on 2011-04-30 15:34:00

The Chicago Pneumatic CP7200S Mini Pistol Random Orbital Sander. Mini pistol random orbital sander with 2" (50mm) and 3" (75mm) H&L pads Rubber molded pistol grip Adjustable power regulator Two finger progressive throttle Muffled handle exhaust > read more

Chicago Pneumatic CP7500D 2 Inch (50mm) Angle Grinder

Published on 2011-04-29 14:03:00

The Chicago Pneumatic CP7500D 2 Inch (50mm) Angle Grinder. CP exclusive cut-off tool adaptor Rubber handle grip and side exhaust Safety lever to prevent accidental start up Full 180° protective guard Benefits Safe, compact and lightweight Versatile > read more

Chicago Pneumatic CP857 7 Inch 178mm Heavy Duty Angle Grinder

Published on 2011-04-29 14:00:00

The Chicago Pneumatic CP857 7 Inch 178mm Heavy Duty Angle Grinder. Powerful 1.25hp (932W) high performance motor Aluminum alloy housing, yet lightweight tool Spiral bevel gearing in angle Benefits Efficient with fast material removal Extended life a > read more

Chicago Pneumatic CP854E 5 Inch 125mm Heavy Duty Angle Grinder

Published on 2011-04-29 13:58:00

The Chicago Pneumatic CP854E 5 Inch 125mm Heavy Duty Angle Grinder. Powerful 0.6hp (450W) high performance motor Aluminum alloy housing, yet lightweight tool Spiral bevel gearing in angle Benefits Efficient with fast material removal Extended life a > read more

Chicago Pneumatic CP854 4 Inch (100mm) Heavy Duty Angle Grinder

Published on 2011-04-29 13:56:00

The Chicago Pneumatic CP854 4 Inch (100mm) Heavy Duty Angle Grinder. Powerful 0.6hp (450W) high performance motor Aluminum alloy housing, yet lightweight tool Spiral bevel gearing in angle Benefits Efficient with fast material removal Extended life > read more

Chicago Pneumatic CP1664 10mm 3/8 Inch Drill Capacity Chuck

Published on 2011-04-29 13:51:00

The Chicago Pneumatic CP1664 10mm 3/8 Inch Drill Capacity Chuck. Pistol drill with sliding reverse control Slim design - compact and ligthweigth Benefits Can be use for drilling & screwing Quick change for forward and reverse operator confort Ch > read more

Chicago Pneumatic CP1454 10mm 3/8 Inch Drill Capacity Chuck

Published on 2011-04-29 13:48:00

The Chicago Pneumatic CP1454 10mm 3/8 Inch Drill Capacity Chuck. High-powered, high speed pistol drill Slim design - compact and ligthweigth Benefits Ideal for close quarter drilling Accommodates wide range of drill bit sizes Good power and high spe > read more

Chicago Pneumatic CP1274 10mm 3/8 Inch Drill Capacity Chuck

Published on 2011-04-29 13:46:00

The Chicago Pneumatic CP1274 10mm 3/8 Inch Drill Capacity Chuck. Pistol grip drill with keyless chuck High speed Benefits Power & high speed for improved cycle times Quick drill bit change Operator comfort and productivity Chicago Pneumatic CP12 > read more

Chicago Pneumatic CP1264 10mm (3/8 Inch) Drill Capacity Chuck

Published on 2011-04-29 13:44:00

The Chicago Pneumatic CP1264 10mm (3/8 Inch) Drill Capacity Chuck. Short, low-noise power drill High power & high speed Short length = manoeuvrability Streamlined and compact Slim design - compact and ligthweigth Benefits Accommodates wide range > read more

Chicago Pneumatic CP1064 10mm (3/8 Inch) Capacity Chuck

Published on 2011-04-29 13:41:00

The Chicago Pneumatic CP1064 10mm (3/8 Inch) Capacity Chuck. High-powered pistol drill Slim design - compact and ligthweigth Benefits Ideal for close quarter drilling Accommodates wide range of drill bit sizes Good power for general drilling Chicago > read more

Chicago Pneumatic CP789HR 1/2 Inch (13mm) Super Duty Pistol Drill

Published on 2011-04-29 13:39:00

The Chicago Pneumatic CP789HR 1/2 Inch (13mm) Super Duty Pistol Drill. Powerful with 0.5hp (370W) motor Teasing throttle and low speed for precision drilling at 500 rpm Industrial quality Jacob's chuck Needle bearing gearing and oil free operation R > read more

Chicago Pneumatic CP789R-26 3/8 Inch (10mm) Super Duty Pistol Drill

Published on 2011-04-28 17:48:00

The Chicago Pneumatic CP789R-26 3/8 Inch (10mm) Super Duty Pistol Drill. Powerful with 0.5hp (370W) motor Teasing throttle and high speed precision drilling at 2600 rpm Industrial quality Jacob's chuck Needle bearing gearing and oil free operation R > read more

Chicago Pneumatic CP9792 3/8 Inch (10mm) Heavy Duty Pistol Drill

Published on 2011-04-28 17:45:00

The Chicago Pneumatic CP9792 3/8 Inch (10mm) Heavy Duty Pistol Drill. Powerful motor Industrial quality Jacob's keyless chuck Reversible and Ergonomic grip Handle exhaust Benefits Productivity and durability Maximize operator comfort Power suitable > read more

Chicago Pneumatic CP9790 3/8 Inch (10mm) Heavy Duty Pistol Drill

Published on 2011-04-28 17:43:00

The Chicago Pneumatic CP9790 3/8 Inch (10mm) Heavy Duty Pistol Drill. Powerful motor Industrial quality Jacob's chuck Reversible and Ergonomic grip Handle exhaust Benefits Productivity and durability Maximize operator comfort Power suitable for many > read more

Chicago Pneumatic CP785QC 3/8 Inch (10mm) Standard Duty Pistol Drill

Published on 2011-04-28 17:41:00

The Chicago Pneumatic CP785QC 3/8 Inch (10mm) Standard Duty Pistol Drill. Keyless chuck Powerful energy efficient motor resists stalls Triple idler planetary gearing Ergonomic handle Handle exhaust Benefits Smooth operation and extended tool life Pr > read more

Chicago Pneumatic CP785 3/8 Inch (10mm) Standard Duty Pistol Drill

Published on 2011-04-28 17:38:00

The Chicago Pneumatic CP785 3/8 Inch (10mm) Standard Duty Pistol Drill. Powerful energy efficient motor resists stalls Triple idler planetary gearing Ergonomic handle Handle exhaust Benefits Smooth operation and extended tool life Unmatched durabili > read more

Chicago Pneumatic CP9287 3/8 Inch (10mm) Heavy Duty Pistol Drill

Published on 2011-04-28 17:36:00

The Chicago Pneumatic CP9287 3/8 Inch (10mm) Heavy Duty Pistol Drill. Powerful with 0.5hp (370W) motor Fast and efficient at 2900 rpm Industrial quality Jacob's keyless chuck Ergonomic grip Handle exhaust Benefits Productivity and durability Maximiz > read more

Chicago Pneumatic CP7300RQC 1/4 Inch (6mm) Mini Compact Drill

Published on 2011-04-28 17:34:00

The Chicago Pneumatic CP7300RQC 1/4 Inch (6mm) Mini Compact Drill. Industrial quality Jacob's keyless chuck Ergonomic grip and Lightweight, only 1.35 lbs (0,61kg) Progressive throttle Reversible drill fast at 2700 rpm Planetary gearing with brass bu > read more

Chicago Pneumatic CP7300R 1/4 Inch (6mm) Mini Compact Drill

Published on 2011-04-28 17:31:00

The Chicago Pneumatic CP7300R 1/4 Inch (6mm) Mini Compact Drill. 1/4" (6mm) Mini compact drill Ergonomic grip and Lightweight, only 1.35 lbs (0,61kg) Progressive throttle Reversible drill fast at 2700 rpm Planetary gearing with brass bushings for lo > read more

Chicago Pneumatic CP7300 1/4 Inch (6mm) Mini Compact Drill

Published on 2011-04-28 17:28:00

The Chicago Pneumatic CP7300 1/4 Inch (6mm) Mini Compact Drill. Ergonomic grip and Lightweight, only 1.35 lbs (0,61kg) Progressive throttle Non reversible drill fast at 2800 rpm Planetary gearing with brass bushings for low wear and long life Adjust > read more

Chicago Pneumatic CP2612 Screwdrivers

Published on 2011-04-28 17:25:00

The Chicago Pneumatic CP2612 Screwdrivers. Cushion clutch Benefits Ideal for multiple applications Operator comfort Durability & quality Chicago Pneumatic CP2612 Screwdrivers Specifications:Part number 6151922612 Model CP2612 Screw type soft > read more

Jet 101701 SMH-1/2T-15, 1/2 Ton 15 Foot Lift Chain Hoist

Published on 2011-04-27 18:45:00

Jet 101701 SMH-1/2T-15, 1/2 Ton 15 Foot Lift Chain Hoist Tough and Rugged! Priced to fit any budget. Full range of capacity 1/2 to 30 tons. Standard features found only in higher priced models. Economical hand chain hoist designed for years of tr > read more

Hitachi EC2510E 5.5 HP Gas Powered, 8 Gallon Wheelbarrow Air Compressor w/ Control Panel, Oil-lube

Published on 2011-04-27 16:23:00

Hitachi EC2510E 5.5 HP Gas Powered, 8 Gallon Wheelbarrow Air Compressor w/ Control Panel, Oil-lube Solid cast iron cylinder provides industry recognized premium material for long life, consistent compression and low oil carryover Baseplate integrate > read more

Hitachi 725297 NV83A2(S) , EC12, Fittings Framing Combo Kit

Published on 2011-04-27 16:22:00

Here is a great opportunity to save some money on 2 of Hitachi's most popular items. This combo kit includes the NR83A framing nailer along with the EC12 oil-bath stack tank compressor. Also included are the fittings, tape, oil and 50 feet of pneumat > read more

Jet 526340 AG-4S, 4 Inch Industrial Angle Grinder

Published on 2011-04-27 16:21:00

Jet 526340 AG-4S, 4 Inch Industrial Angle Grinder Lightweight, quiet, and easily adjustable, our 4-inch angle grinder is perfect for jobs that require more precision and control than offered by the standard 4 inch grinder. This 3/4-horsepower workho > read more

Jet 526345 AG-4.5S, 4.5 Inch Industrial Angle Grinder

Published on 2011-04-27 16:20:00

Jet 526345 AG-4.5S, 4.5 Inch Industrial Angle Grinder Lightweight and easily adjustable, yet perfect for jobs that require precision and control – it’s JET’s best industrial angle grinder. This 3/4-horsepower workhorse runs free at an impressi > read more

Jet JSG-0522, 7 Inch Angle Grinder

Published on 2011-04-27 16:19:00

Jet JSG-0522, 7 Inch Angle Grinder Heavy-duty ball bearing construction for vibration free performance Durable precision machined and hardened steel gears Rugged aluminum alloy housing with steel wheel guard Features safety lock throttle and dead han > read more

Jet JSM-619, 4 Inch Angle Grinder

Published on 2011-04-27 16:18:00

Jet JSM-619, 4 Inch Angle Grinder The JSM-619 is a heavy-duty 4" air operated angle grinder. It is constructed of rugged aluminum alloy for the housing and has precision machined and hardened steel gears. It features a safety lock throttle and a sid > read more

Jet JSM-6195B, 5 Inch Angle Grinder

Published on 2011-04-27 16:17:00

Jet JSM-6195B, 5 Inch Angle Grinder Heavy-duty ball bearing construction for vibration-free performance; Durable precision machined and hardened steel gears; Rugged aluminum alloy housing with steel wheel guards; Features safety lock throttles and d > read more

Jet JNS-185 4-1/2 Inch X 5/8 Inch Air Grinder 1/2Hp 11000 rpm

Published on 2011-04-27 16:16:00

Jet JNS-185 5" (4-1/2" X 5/8") Pneumatic Grinder with 1/2 HP and 11000 RPM Free Speed. Features Comfort Grip handle The throttle lever locks for safety on all models. Built in Air Regulator Hardened and beveled Steel Gears for Longer life > read more

Jet JSM-5130, 1/4 Inch High Speed Die Grinder

Published on 2011-04-27 16:15:00

Jet JSM-5130, 1/4 Inch High Speed Die Grinder Polishing, deburring, grinding, and more -- the JSM-5130 has the power and streamlined design to do it all. A low profile shape allows the technician to work easily in tight spaces. An impressive ½- hor > read more

Jet 331500 3SS-3C-15, 3 Ton, 3Ph, 105 Lift, 230/460V, Prewired 460V Electric Chain Hoist

Published on 2011-04-26 18:06:00

Jet 331500 3SS-3C-15, 3 Ton, 3Ph, 105 Lift, 230/460V, Prewired 460V Electric Chain Hoist Jet 331500 Electric Chain Hoist Features:Designed for commercial and industrial applications 1/2 ton to 5 ton capacities, single or three phase models 10', 15' a > read more

Jet 754041 S-30N Stand for 30 Inch SBR-30N

Published on 2011-04-26 18:04:00

Jet 754041 S-30N Stand for 30 Inch SBR-30N Jet 754041Stand for 30 Inch SBR-30N Features:For use with JET SBR-30N combination shear brake roll Supporting metalforming machines, rotory machines and arbor presses > read more

Jet 754222 HB-2248N Bench Hand Brake, 22 Gauge, 48 Inch Capacity

Published on 2011-04-26 18:03:00

Jet 754222 HB-2248N Bench Hand Brake, 22 Gauge, 48 Inch Capacity This bench model hand brake is suitable for many types of metal forming operations. All the body sections are welded steel plates with heavy truss rods and braces designed to give t > read more

Jet 754112K SS-12, Hand Slitting Shear 1/8 Inch x 11-3/4 Inch Blade Length

Published on 2011-04-26 18:03:00

Jet 754112K SS-12, Hand Sliting Shear 1/8 Inch x 11-3/4 Inch Blade Length PORTABLE SHEARS STANDARD FEATURES Capable of shearing sheet steel, steel bars and rods plus many non-metallic materials Replaceable high quality stainless steel blades are h > read more

Jet 752002 HB-1697H, 16 Gauge, 97 Inch Hand Brake

Published on 2011-04-26 18:03:00

Jet 752002 HB-1697H, 16 Gauge, 97 Inch Hand Brake Jet 752002 16 Gauge, 97 Inch Hand Brake Features:Simplicity of design, improved truss rod construction and a minimum number of moving parts make the JET hand brake easy to operate All body sections a > read more

Jet 752652 FS-1652H Foot Shear

Published on 2011-04-26 18:03:00

Jet 752652 FS-1652H Foot Shear Jet 752652 FS-1652H Foot Shear Features:Ideal for precision shearing of mild steel up to 16-gauge Two-way blade configuration provides twice the cutting life Upper blade is two-way; bottom blade is one-way 2 angle cutt > read more

Jet 754031 SBR-30N Combination Shear Brake Roll

Published on 2011-04-26 18:03:00

Jet 754031 SBR-30N Combination Shear Brake Roll This is your all-in-one forming machine, with a combination shear, brake, and roll! The shear can be used for mild steel, aluminum, brass, copper, lead, plastic, and zinc. The brake is equipped wit > read more

Jet 440304 SJTB-1, 15/16 Inch x 42 Inch, Fits SJ-25T Screw Jack Turning Bar

Published on 2011-04-26 18:03:00

Jet 440304 SJTB-1, 15/16 Inch x 42 Inch, Fits SJ-25T Screw Jack Turning Bar. > read more

Jet 754122 BP-2248N Box and Pan Brake Bench Model, 22 Gauge, 48 Inch Capacity

Published on 2011-04-26 18:03:00

Jet 754122 BP-2248N Box and Pan Brake Bench Model, 22 Gauge, 48 Inch Capacity The Jet 754122/BP-2248N Bench Model Box and Pan Brake incorporates all the features of our standard hand brakes but with greater range of applications. With the fingers > read more

Jet 754216 HB-1648N Bench Hand Brake, 16 Gauge, 48 Inch Capacity

Published on 2011-04-26 18:03:00

Jet 754216 HB-1648N Bench Hand Brake, 16 Gauge, 48 Inch Capacity This bench model hand brake is suitable for many types of metal forming operations. All the body sections are welded steel plates with heavy truss rods and braces designed to give t > read more

Chicago Pneumatic CP726H 1/2 Inch Heavy Duty Impact Wrench

Published on 2011-04-20 17:37:00

The Chicago Pneumatic CP726H 1/2 Inch Heavy Duty Impact Wrench. DYNA-PACT oil bath clutch One handed push button forward /reverse with 4 positive power settings Full power in reverse Through handle air exhaust and 360° air inlet swivel Chicago Pneu > read more

Chicago Pneumatic CP724H 3/8 Inch Heavy Duty Impact Wrench

Published on 2011-04-20 17:34:00

The Chicago Pneumatic CP724H 3/8 Inch Heavy Duty Impact Wrench. DYNA-PACT oil bath clutch One handed push button forward/reverse with 4 positive power settings Full power in reverse Through handle air exhaust and 360° air inlet swivel Chicago Pneum > read more

Chicago Pneumatic CP7778 1 Inch Heavy Duty Impact Wrench

Published on 2011-04-20 17:30:00

The Chicago Pneumatic CP7778 1 Inch Heavy Duty Impact Wrench. X clutch High efficiency 6 vane motor 3 position power settings with directional control Angled down exhaust Chicago Pneumatic CP7778 1 Inch Impact Wrench Specifications:Part number 8941 > read more

Chicago Pneumatic CP894 1 Inch Heavy Duty Impact Wrench

Published on 2011-04-19 17:39:00

The Chicago Pneumatic CP894 1 Inch Heavy Duty Impact Wrench. Pin clutch in oil bath One handed push button forward /reverse with 3 positive power settings Full power in reverse Adjustable side handle Chicago Pneumatic CP894 1 Inch Impact Wrench Spec > read more

Chicago Pneumatic CP897-6 1 Inch Heavy Duty Impact Wrench

Published on 2011-04-19 17:36:00

The Chicago Pneumatic CP897-6 1 Inch Heavy Duty Impact Wrench. X clutch Lightweight tool: 19 lbs (8,62 kg) High performance motor with minimal air consumption Teasing throttle for easy bolt starting Convenient reverse valve Plus 6" extended anvil Ch > read more

Chicago Pneumatic CP7775 1 Inch Heavy Duty Impact Wrench

Published on 2011-04-19 17:33:00

The Chicago Pneumatic CP7775 1 Inch Heavy Duty Impact Wrench. X clutch Lightweight tool: 22,2 lbs (10,6 kg) High torque: 1550 ft-lb (2102 Nm) 4 position power settings in forward and reverse Ergonomic ally designed handles and trigger Chicago Pneuma > read more

Chicago Pneumatic CP9561 3/4 Inch Air Impact Wrench

Published on 2011-04-18 15:54:00

The Chicago Pneumatic CP9561 3/4 Inch Air Impact Wrench. Package Quantity: (1) Unit Type: Heavy Duty Air Impact Wrench Type of Power: Pneumatic Size (Inch): 3/4 Inlet Size (Inch): 3/8 Chicago Pneumatic CP9561 3/4 Inch Air Impact Wrench Specification > read more

Chicago Pneumatic CP7774 1 Inch Super Duty Impact Wrench

Published on 2011-04-18 15:51:00

The Chicago Pneumatic CP7774 1 Inch Super Duty Impact Wrench. Rocking dog clutch High torque: 1750 ft-lbs (2373 Nm) 3 position power settings in forward and reverse Ergonomic handle and lightweight tool Chicago Pneumatic CP7774 1 Inch Impact Wrench > read more

Chicago Pneumatic CP5000 1 Inch Super Duty Impact Wrench

Published on 2011-04-18 15:47:00

The Chicago Pneumatic CP5000 1 Inch Super Duty Impact Wrench. X clutch 4 position power settings throttle for ease of use Convenient reverse valve Plus 7" extended anvil Chicago Pneumatic CP5000 1 Inch Super Duty Impact Wrench Specifications:Part nu > read more

Chicago Pneumatic CP9540-B 1/2 Inch Super Duty Impact Wrench

Published on 2011-04-18 15:44:00

The Chicago Pneumatic CP9540-B 1/2 Inch Super Duty Impact Wrench. DYNA-PACT oil bath clutch One handed push button forward /reverse with 4 positive power settings Full power in reverse Compact and ergonomic with rubber handle Through handle air exha > read more

Chicago Pneumatic CP734H 1/2 Inch Super Duty Impact Wrench

Published on 2011-04-18 15:41:00

The Chicago Pneumatic CP734H 1/2 Inch Super Duty Impact Wrench. DYNA-PACT oil bath clutch One handed push button forward /reverse with 4 positive power settings Full power in reverse Compact and ergonomic with rubber grip Through handle air exhaust > read more

Chicago Pneumatic CP6060 SASAR 3/4 Inch Industrial Impact Wrench

Published on 2011-04-18 15:39:00

The Chicago Pneumatic CP6060 SASAR 3/4 Inch Industrial Impact Wrench. 995 Ft Lbs Max torque Durable Construction - Long Service Life Proven Design 2 Jaw Hammer Mechanism Chicago Pneumatic CP6060 SASAR Impact Wrench Specifications:Part number T02405 > read more

Chicago Pneumatic CP776-6 3/4-Inch Super Duty Air Impact Wrench

Published on 2011-04-18 15:35:00

The Chicago Pneumatic CP776-6 3/4-Inch Super Duty Air Impact Wrench. Compact (gets into tight spots) Durable clutch delivers smooth operation under extreme use One handed push button forward /reverse with 4 positive power settings and ultimate full > read more

Chicago Pneumatic CP772H-6 3/4 Inch Heavy Duty Impact Wrench

Published on 2011-04-18 15:33:00

The Chicago Pneumatic CP772H-6 3/4 Inch Heavy Duty Impact Wrench. Pin clutch oil bath One handed push button forward /reverse with 4 positive power settings Full power in reverse New comfortable contoured handle grip 360° air inlet swivel Plus 6" e > read more

Chicago Pneumatic CP6500 RSR2 1/2 Inch Air Impact Wrench

Published on 2011-04-18 15:31:00

The Chicago Pneumatic CP6500 RSR2 1/2 Inch Air Impact Wrench. Package Quantity: (1) Unit Type: Heavy Duty Air Impact Wrench Type of Power: Pneumatic Size (Inch): 1/2 Inlet Size (Inch): 1/4 Chicago Pneumatic CP6500 RSR2 1/2 Inch Air Impact Wrench Spe > read more

Chicago Pneumatic CP7763-6 3/4 Inch Super Duty Impact Wrench

Published on 2011-04-18 15:28:00

The Chicago Pneumatic CP7763-6 3/4 Inch Super Duty Impact Wrench. Twin hammer clutch High Power: 1200 ft-lbs (1627 Nm) Compact size at only 13.9 lbs (6,3 kg) Combined power regulator with forward/reverse Plus 6" extended anvil (dual socket retainer) > read more

Chicago Pneumatic CP6500 RS 1/2 Inch Impact Wrench

Published on 2011-04-17 15:40:00

The Chicago Pneumatic CP6500 RS 1/2 Inch Impact Wrench. Super Durable 525 feet pounds Max Torque Perfect for Demanding Applications 1-Year parts and labor Chicago Pneumatic CP6500 RS 1/2 Inch Impact Wrench Specifications:Part number T025214 Model > read more

Chicago Pneumatic CP776 3/4 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:35:00

The Chicago Pneumatic CP776 3/4 Inch Heavy Duty Impact Wrench . Compact (gets into tight spots) Durable clutch delivers smooth operation under extreme use One handed push button forward /reverse with 4 positive power settings and ultimate full power > read more

Chicago Pneumatic CP7733-2 1/2 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:32:00

The Chicago Pneumatic CP7733-2 1/2 Inch Heavy Duty Impact Wrench. CP's patented SPRINGHAMMER clutch Low air consumption and high torque Ergonomic trigger and handle Plus a 2" extended anvil for tire work Chicago Pneumatic CP7733-2 1/2 Inch Impact Wr > read more

Chicago Pneumatic CP9560 3/4 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:29:00

The Chicago Pneumatic CP9560 3/4 Inch Heavy Duty Impact Wrench. Pin clutch oil bath One handed push button forward /reverse with 4 positive power settings Full power in reverse 360° air inlet swivel Chicago Pneumatic CP9560 3/4 Inch Impact Wrench S > read more

Chicago Pneumatic CP772HK 3/4 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:26:00

The Chicago Pneumatic CP772HK 3/4 Inch Heavy Duty Impact Wrench. Pin clutch oil bath One handed push button forward /reverse with 4 positive power settings Full power in reverse New comfortable contoured handle grip 360° air inlet swivel Kit includ > read more

Chicago Pneumatic CP772H 3/4 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:23:00

The Chicago Pneumatic CP772H 3/4 Inch Heavy Duty Impact Wrench. Pin clutch oil bath One handed push button forward /reverse with 4 positive power settings Full power in reverse New comfortable contoured handle grip 360° air inlet swivel Chicago Pne > read more

Chicago Pneumatic CP7733 1/2 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:21:00

The Pneumatic CP7733 1/2 Inch Heavy Duty Impact Wrench. CP's patented SPRINGHAMMER clutch Low air consumption and high torque Ergonomic trigger and handle Chicago Pneumatic CP7733 1/2 Inch Impact Wrench Specifications:Part number 8944077330 Model > read more

Chicago Pneumatic CP7773 1 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:17:00

The Chicago Pneumatic CP7773 1 Inch Heavy Duty Impact Wrench. Twin hammer clutch High Power: 1200 ft-lbs (1627 Nm) Compact size with only 11.57 lbs (5,25 kg) Combined power regulator with forward/reverse Chicago Pneumatic CP7773 1 Inch Heavy Duty Im > read more

Chicago Pneumatic CP9545 1/2 Inch Heavy Duty Impact Wrench

Published on 2011-04-17 15:14:00

The Chicago Pneumatic CP9545 1/2 Inch Heavy Duty Impact Wrench. CP's patented SPRINGHAMMER clutch Low air consumption and high torque Ergonomic trigger and handle Chicago Pneumatic CP9545 1/2 Inch Impact Wrench Specifications:Part number 6151909545 > read more

Chicago Pneumatic CP796SP No.5 Spline Air Impact Wrench

Published on 2011-04-17 15:12:00

The Chicago Pneumatic CP796SP No.5 Spline Air Impact Wrench. With a torque of 2,000 ft/lbs, the industry's best power to weight ratio in the 1" class Compact (gets into tight spots) Industrial quality and dependability Ideal for spring work, tractor > read more

Chicago Pneumatic CP721 3/8 Inch Heavy Duty Impact Wrench

Published on 2011-04-16 17:56:00

The Chicago Pneumatic CP721 3/8 Inch Heavy Duty Impact Wrench. Rocking dog clutch Built in power regulator Ergonomic handle Chicago Pneumatic CP721 3/8 Inch Impact Wrench Specifications:Part number T021963 Model CP721 Handle type Pistol Square > read more

Chicago Pneumatic CP2041 Pistol Impact Screwdriver

Published on 2011-04-16 17:52:00

The Chicago Pneumatic CP2041 Pistol Impact Screwdriver with Quick Change Chuck. Reversible High torque and high speed Ergonomic with suspension bail Chicago Pneumatic CP2041 Pistol Impact Screwdriver Specifications:Part number 6151922041 Model CP > read more

Chicago Pneumatic CP2037 Straight Impact Screwdriver

Published on 2011-04-16 17:50:00

The Chicago Pneumatic CP2037 Straight impact screwdriver with quick change chuck. Reversible & lever start Built in power regulator Ergonomic with suspension bail Chicago Pneumatic CP2037 Straight Impact Screwdriver Specifications:Part number 6 > read more

Chicago Pneumatic CP2036 Straight impact screwdriver with quick change chuck

Published on 2011-04-16 17:45:00

The Chicago Pneumatic CP2036 Straight impact screwdriver with quick change chuck Reversible & lever start Built in power regulator Ergonomic with suspension bail Chicago Pneumatic CP2036 Specifications:Part number 6151922036 Model CP2036 Han > read more

Ingersoll Rand BC10 IQV Battery Charger

Published on 2011-04-15 17:01:00

The Ingersoll Rand BC10 IQV Battery Charger digitally communicates with every IQV Series Lithium-Ion or 14.4V & 7.2V NiCd battery, to identify chemistry, voltage, and condition, and then optimizes the charging cycle to protect cells and enhance b > read more

Ingersoll Rand BL702 14.4v Lithium Battery

Published on 2011-04-15 16:59:00

The Ingersoll Rand BL702 14.4v Lithium Battery pack smart voltage into lightweight packages. Integrated microprocessor circuitry optimizes charging, protects cells, and enhances performance. Unique on-battery digital display indicates charge level at > read more

Ingersoll Rand N192 19.2v Ni-Cad Battery

Published on 2011-04-15 16:57:00

The Ingersoll Rand N192 19.2v Ni-Cad Battery provide reliable performance at a reasonable price. Integrated microprocessor circuitry optimizes charging, protects cells, and enhances performance. Patent pending IQv Grip twist-to-lock battery interface > read more

Ingersoll Rand W360-NSP 7.2v Ni-Cad Battery

Published on 2011-04-15 16:55:00

The Ingersoll Rand W360-NSP 7.2v Ni-Cad Battery provide reliable performance at a reasonable price. Integrated microprocessor circuitry optimizes charging, protects cells, and enhances performance. Patent pending IQv Grip twist-to-lock battery interf > read more

Ingersoll Rand W360-LSP 1/2 Inch Cordless Impact Kit (Li-Ion)

Published on 2011-04-15 16:54:00

The Ingersoll Rand W360-LSP 1/2 Inch Cordless Impact Kit (Li-Ion). Designed to provide great power to weigh Includes 3/8 inch drive impactool, lithium ion battery and a IQV charger along with aTB2 tool bag Ideal for general assembly, maintenance, as > read more

Ingersoll Rand W360P 1/2 Inch Square Drive Pin Type 19.2V Impactool

Published on 2011-04-15 16:52:00

The Ingersoll Rand W360P 1/2 Inch Square Drive Pin Type 19.2V Impactool is the ideal choice for automotive & tire repair, mobile service, industrial facilities, maintenance and heavy-duty production applications. The pin-type anvil provides for m > read more

Ingersoll Rand W360 1/2 Inch Square Drive 19.2V Impactool

Published on 2011-04-15 16:50:00

The Ingersoll Rand W360 1/2 Inch Square Drive 19.2V Impactool is the ideal choice for automotive & tire repair, mobile service, industrial facilities, maintenance and heavy-duty production applications. Like the whole line of IQv Series Cordless, > read more

Ingersoll Rand W175P 1/2 Inch Square Drive Pin Type 14.4V Impactool

Published on 2011-04-15 16:48:00

The Ingersoll Rand W175P 1/2 Inch Square Drive Pin Type 14.4V Impactool is the most powerful and durable cordless impact in its class. Patent-pending IQV™ technology provides maximum performance, durability, and battery life. Compatible with both L > read more

Ingersoll Rand W150-NSP 1/2 Inch Square Drive 14.4V Impactool

Published on 2011-04-15 16:46:00

The Ingersoll Rand W150-NSP 1/2 Inch Square Drive 14.4V Impactool is the most powerful and durable cordless impact in its class. Patent-pending IQV™ technology provides maximum performance, durability, and battery life. Compatible with both Lithium > read more

Ingersoll Rand W150-LSP 3/8 Inch Cordless Impact Kit (Li-Ion)

Published on 2011-04-15 16:12:00

The Ingersoll Rand W150-LSP 3/8 Inch Cordless Impact Kit (Li-Ion). Designed to provide great power to weigh Includes 3/8 inch drive impactool, lithium ion battery and a IQV charger along with aTB2 tool bag Ideal for general assembly, maintenance, as > read more

Ingersoll Rand W040P 3/8 Inch Square Drive Pin Type Impact Wrench

Published on 2011-04-14 17:01:00

The Ingersoll Rand W040P 3/8 Inch Square Drive Pin Type Impact Wrench is light weight and compact for easy access in confined spaces. Patent-pending IQv technology provides maximum performance, durability, and battery life. The W040P is compatible wi > read more

Ingersoll Rand W040SQ 3/8 Inch Square Drive Impact Wrench

Published on 2011-04-14 16:59:00

The Ingersoll Rand W040SQ 3/8 Inch Square Drive Impact Wrench is light weight and compact for easy access in confined spaces. Patent-pending IQv technology provides maximum performance, durability, and battery life. The W040SQ is compatible with both > read more

Ingersoll Rand W040 1/4 Inch QC Hex Cordless Impact Wrench

Published on 2011-04-14 16:57:00

The Ingersoll Rand W040 1/4 Inch QC Hex Cordless Impact Wrench is lightweight and compact for easy access in confined spaces. Patent-pending IQv technology provides maximum performance, durability, and battery life. The W040 runs on both the 7.2V lit > read more

Ingersoll Rand R385 1/2 Inch Square Drive Ratchet

Published on 2011-04-14 16:54:00

The Ingersoll Rand R385 1/2 Inch Square Drive Ratchet delivers the perfect combination of power, durability, and convenience. More powerful than any other ratchet in its class, the R385 also offers increased mobility for hard-to-reach areas. Features > read more

Ingersoll Rand R380 3/8 Inch Square Drive Ratchet

Published on 2011-04-14 16:52:00

The Ingersoll Rand R380 3/8 Inch Square Drive Ratchet delivers the perfect combination of power, durability, and convenience. More powerful than any other ratchet in its class, the R380 also offers increased mobility for hard-to-reach areas. Features > read more

Ingersoll Rand R145 3/8 Inch Square Drive Ratchet

Published on 2011-04-14 16:48:00

The Ingersoll Rand R145 3/8 Inch Square Drive Ratchet delivers the perfect combination of power, durability, and convenience. More powerful than any other ratchet in its class, the R145 also provides increased mobility for hard-to-reach areas. Featur > read more

Ingersoll Rand R140 1/4 Inch Square Drive Ratchet

Published on 2011-04-14 16:46:00

The Ingersoll Rand R140 1/4 Inch Square Drive Ratchet delivers the perfect combination of power, durability, and convenience. More powerful than any other ratchet in its class, the R140 also provides increased mobility for hard-to-reach areas. Featur > read more

Ingersoll Rand GS25 Straight Die Grinder 1/4 Inch Collet

Published on 2011-04-14 16:44:00

The Ingersoll Rand GS25 Straight Die Grinder 1/4 Inch Collet provides the perfect combination of performance and portability for light-duty grinding applications. Featuring the patent-pending IQv Grip twist to lock mounting that grips the battery int > read more

Ingersoll Rand GR25 Right Angle Die Grinder 1/4 Inch Collet

Published on 2011-04-14 16:42:00

The Ingersoll Rand GR25 Right Angle Die Grinder 1/4 Inch Collet provides the perfect combination of performance and portability for light-duty grinding applications. Featuring the patent-pending IQv Grip twist to lock mounting that grips the battery > read more

Ingersoll Rand D650 1/2 Inch Cordless Drill/Driver with Keyless Chuck

Published on 2011-04-14 16:38:00

The Ingersoll Rand D650 1/2 Inch Cordless Drill/Driver with Keyless Chuck offers the most power per pound of any cordless drill/driver in its class. Patent-pending IQv technology ensures maximum performance, durability, and battery life. The D650 can > read more

Hitachi WH18DL 18V Impact Driver, 3.0 Ah Li-Ion, 1330 in/lbs torque, 2 Batteries

Published on 2011-04-12 16:21:00

Hitachi WH18DL 18V Impact Driver, 3.0 Ah Li-Ion, 1330 in/lbs torque, 2 Batteries Covered by Hitachi's 10-Year Lithium Ion Tool Warranty- click here to download the Lithium Ion Tool Warranty Brochure (2) 3.0 Ah HXP Lithium Ion batteries for three ti > read more

Jet 140104 WDS-3018, 30 Inch x 18 Inch Hardwood Dolly, Solid Top

Published on 2011-04-12 16:08:00

Jet 140104 WDS-3018, 30 Inch x 18 Inch Hardwood Dolly, Solid Top Jet 140104 Hardwood Dolly DetailsFor moving furniture, bulky crates and many other items Kiln dried oak used to prevent warping or shrinkage Countersunk bolt holes to provide a smooth w > read more

Jet 140103 WDS-2416, 24 Inch x 36 Inch Hardwood Dolly, Solid Top

Published on 2011-04-12 16:06:00

Jet 140103 WDS-2416, 24 Inch x 36 Inch, Solid Top Jet 140103 Hardwood Dolly Features:For moving furniture, bulky crates and many other items Kiln dried oak used to prevent warping or shrinkage Countersunk bolt holes to provide a smooth working surfac > read more

Jet 140101 WDF-3018, 30 Inch x 18 Inch Hardwood Dolly, Open Style Flush End

Published on 2011-04-12 16:05:00

Jet 140101 WDF-3018, 30 Inch x 18 Inch Hardwood Dolly, Open Style Flush End Jet 140101 Hardwood Dolly Features:For moving furniture, bulky crates and many other items Kiln dried oak used to prevent warping or shrinkage Countersunk bolt holes to provi > read more

Jet 140024 SC-2436, 24 Inch x 36 Inch Shelves, Service Cart

Published on 2011-04-12 16:03:00

Jet 140024 SC-2436, 24 Inch x 36 Inch Shelves, Service Cart 500-lb. Capacity > read more

Jet 140100 WDF-2416, 24 Inch x 16 Inch Carpet Dolly, Open Style Flush End

Published on 2011-04-12 16:03:00

Jet 140100 WDF-2416, 24 Inch x 16 Inch Carpet Dolly, Open Style Flush End Use JET hardwood dollies for moving furniture, bulky crates and many other items; Kiln dried oak used to prevent warping or shrinkage; Countersunk bolt holes to provide a sm > read more

Jet 140019 PUC-3725, Resin Utility Cart

Published on 2011-04-12 16:01:00

Jet 140019 PUC-3725, Resin Utility Cart Heavy duty resin construction resists dents, chips, and rust; Handle has built in storage bins; Round corners mean no sharp edges to nick walls or furniture; Large, quiet, non-marking 5" casters. > read more

Jet 140018 PUC-3117, Resin Utility Cart

Published on 2011-04-12 16:00:00

Jet 140018 PUC-3117, Resin Utility Cart Heavy duty resin construction resists dents, chips, and rust; Handle has built in storage bins; Round corners mean no sharp edges to nick walls or furniture; Large, quiet, non-marking 5" casters. > read more

Jet 140130 JPH-1000 Panel Handler, 1000 LB Capacity

Published on 2011-04-12 15:56:00

Jet 140130 JPH-1000 Panel Handler, 1000 LB Capacity The JET JPH-1000 Panel handling cart will make moving large, cumbersome sheet goods a breeze. From unloading, to positioning for dimensional cutting the JPH-1000 acts as your silent assistant. Th > read more

Jet 140022 FDPT-660P, Fold Down Platform Truck 24 Inch x 36 Inch Steel Deck, 8 Inch Pneumatic Casters, 660-lb. Capacity

Published on 2011-04-12 15:55:00

Jet 140022 FDPT-660P, Fold Down Platform Truck 24 Inch x 36 Inch Steel Deck, 8 Inch Pneumatic Casters, 660-lb. Capacity Moving boxes, plants, parts or whatever around the home shop or office. This JET Fold Down Platform Truck will save your back al > read more

Ingersoll Rand 295A 1 Inch Air Impact

Published on 2011-04-11 17:00:00

The Ingersoll Rand 295A 1 Inch Air Impact. exceptional power, control, and durability. It delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed @ 120 psi (8.3 bar) and features a high-efficiency 6-vane motor. The integral 360 > read more

Ingersoll Rand 293S No. 5 Spline Air Impact

Published on 2011-04-11 16:58:00

The Ingersoll Rand 293S No. 5 Spline Air Impact. Most Powerful 1" Impact wrench 2,000 ft lbs or maximum torque 3,500 rpm Handle Exhaust > read more

Ingersoll Rand 293 1 Inch Air Impact Wrench

Published on 2011-04-11 16:56:00

The Ingersoll Rand 293 1 Inch Air Impact Wrench for spring work, tractor pads, bus maintenance, off-road and farm equipment work. Ingersoll Rand 293 1 Inch Air Impact Wrench Features:Unique TwinHammer™ impact mechanism tuned to deliver ultimate pow > read more

Ingersoll Rand 290S No. 5 Spline Impact Wrench

Published on 2011-04-11 16:54:00

The Ingersoll Rand 290S No. 5 Spline Impact Wrench. Designed for cramped sapaces with big power Three Way adjustable handle 1,600 ft lbs maximum torque 6,000 rpm > read more

Ingersoll Rand 290 1 Inch Impact Wrench

Published on 2011-04-11 16:52:00

The Ingersoll Rand 290 1 Inch Impact Wrench. High-production truck tire changing requires the brute force only this jumbo hammer impact mechanism delivers. Also a good choice for spring work, tractor pads, bus maintenance, and off-road and farm equip > read more

Ingersoll Rand 285B-6 1 Inch Air Impact Wrench

Published on 2011-04-11 16:50:00

The Ingersoll Rand 285B-6 1 Inch Air Impact Wrench. Exceptional Power, durability and operator convenience 1,450 ft-Pound or maximum torque 5,000 rpm inlet to prevent hose Knicks 6-Inch extended anvil > read more

Ingersoll Rand 285B 1 Inch Air Impact Wrench

Published on 2011-04-11 16:49:00

The Ingersoll Rand 285B 1 Inch Air Impact Wrench exceptional power, control, and durability. It delivers 1,770 ft-lb (2,400 Nm) of maximum torque, with a 5,250 rpm free speed @ 120 psi (8.3 bar) and features a high-efficiency 6-vane motor. The integr > read more

Ingersoll Rand 280-6 1 Inch Air Impact Wrench

Published on 2011-04-11 16:46:00

The Ingersoll Rand 280-6 1 Inch Air Impact Wrench. High-production truck tire changing requires the brute force only this jumbo hammer impact mechanism delivers. Also a good choice for spring work, tractor pads, bus maintenance, and off-road and farm > read more

Ingersoll Rand 280 1Inch Air Impact

Published on 2011-04-11 16:44:00

The Ingersoll Rand 280 1Inch Air Impact. High-production truck tire changing requires the brute force only this jumbo hammer impact mechanism delivers. Also a good choice for spring work, tractor pads, bus maintenance, and off-road and farm equipment > read more

Ingersoll Rand 271 1 Inch Air Impact Wrench

Published on 2011-04-11 16:42:00

The Ingersoll Rand 271 1 Inch drive air impact wrench is also one of the most powerful. It combines a very compact size with high power output, making it ideal for tire changing, spring work, pinion nut and tractor pad removal, and shock work. Ingers > read more

Ingersoll Rand 1111 1/2 Inch Reactionless Ratchet

Published on 2011-04-10 15:43:00

The Ingersoll Rand 1111 1/2 Inch Reactionless Ratchet. This revolutionary Reactionless Ratchet™ has a unique reactionless mechanism. It makes gearing unnecessary and it absorbs kickback when the nut runs tight. Same specifications as the 111 model, > read more

Ingersoll Rand 111 3/8 Inch Reactionless Ratchet

Published on 2011-04-10 15:41:00

The Ingersoll Rand 111 3/8 Inch Reactionless Ratchet. 3/8-inch super duty air ratchet features unique reaction-less mechanism. Makes gearing unnecessary; absorbs kickback when the nut runs tight Provides 50 ft./lbs. of maximum torque Rear exhaust di > read more

Ingersoll Rand 1133 3/8 Inch Mini Air Ratchet

Published on 2011-04-10 15:39:00

The Ingersoll Rand 1133 3/8 Inch Mini Air Ratchet. TwinPawl Plus head design for durability & long life Ergonomic composite texture grip handle 25ft lbs maximum torque 270 rpm > read more

Ingersoll Rand 1103 1/4 Inch Air Ratchet

Published on 2011-04-10 15:38:00

The Ingersoll Rand 1103 1/4 Inch Air Ratchet. Exclusive TwinPawl Plus head design for durability and long life Two-speed power grip ring: ergonomic textured grip 25-Feet Pound of maximum torque; 270 rpm 270 rpm > read more

Ingersoll Rand 1099XPA 1/2 Inch Air Ratchet

Published on 2011-04-10 15:35:00

The Ingersoll Rand 1099XPA 1/2 Inch Air Ratchet Optimized gear ratio and airflow for extra performance, coupled with exceptional durability. Same specifications as the 109XP model, but with 1/2" drive. 76 ft-lb (103 Nm) maximum torque at 220 rpm fre > read more

Ingersoll Rand 109XPA 3/8 Inch Air Ratchet

Published on 2011-04-10 15:34:00

The Ingersoll Rand 109XPA 3/8 Inch Air Ratchet Optimized gear ratio and airflow for extra performance, coupled with exceptional durability. 76 ft-lb (103 Nm) maximum torque at 300 rpm free speed Variable speed button trigger 360° adustable exhaust > read more

Ingersoll Rand 1077XPA 1/2 Inch Air Ratchet

Published on 2011-04-10 15:32:00

The Ingersoll Rand 1077XPA 1/2 Inch Air Ratchet Based on the industry’s most popular ratchet, the 1077XPA delivers an extra measure of durability with an advanced head design, plus a host of other features. 54 ft-lb (68 Nm) of maximum torque Varia > read more

Ingersoll Rand 107XPA 3/8 Inch Air Ratchet

Published on 2011-04-10 15:31:00

The Ingersoll Rand 107XPA 3/8 Inch Air Ratchet Based on the industry’s most popular ratchet, the 107XPA delivers an extra measure of durability with an advanced head design, plus a host of other features. 54 ft-lb (73 Nm) of maximum torque 360° a > read more

Ingersoll Rand 104 1/4 Inch Air Ratchet

Published on 2011-04-10 15:29:00

The Ingersoll Rand 104 1/4 Inch Air Ratchet. 1/4-inch drive standard duty air ratchet made to fit in the palm of your hand Ideal small engine repair, headlight service work, and bench work Provides 20 ft./lbs. of maximum torque Easy-to-maintain; sim > read more

Ingersoll Rand 103A 1/4 Inch Air Ratchet

Published on 2011-04-10 15:27:00

The Ingersoll Rand 103A 1/4 Inch Air Ratchet. One of Ingersoll Rand's smallest air ratchets at only 6.5 inches long Lightweight at only 1.1 lbs Produces 20 ft lbs of maximum torque 1/4" square drive for use with impact grade sockets 200 rpm free spe > read more

Delta 78-939 Cut-Off Fence

Published on 2011-04-09 15:49:00

The Delta 78-939 Cut-Off Fence. Adjustable to fit the BIESEMEYER Home Shop or Commercial Fences Quick release clamp for fast and safe setups Acts as a stand off to keep material away from the fence when using miter gauge Smooth sliding surface. The > read more

Delta 78-919B Black Biesemeyer Fence Body

Published on 2011-04-09 15:47:00

The Delta 78-919B Black Biesemeyer Fence Body. Fence body constructed from .083 gauge steel The 9-ply fence faces are manufactured to unmatched tolerances Accurate repeatability, eliminating the need to use a hand-held tape to square and set fence > read more

Delta 78-918B Unisaw Black Table Board 31Inch Fof 52 Inch Biesemeye

Published on 2011-04-09 15:45:00

The Delta 78-918B Unisaw Black Table Board 31Inch Fof 52 Inch Biesemeye. Constructed of hardwood alder frame & laminated particle board Laminated on three sides Backer board underside > read more

Delta 78-902 42 Inch Commercial Fence

Published on 2011-04-09 15:43:00

The Delta 78-902 42 Inch Commercial Fence. Easily fits off for left-hand cutting Fence body constructed from .083 gauge steel Laminated 9-ply Birch plywood sides are durable and do not mar easily Simple and secure 3-point locking design Cam handle i > read more

Delta 78-864B Unisaw Black Table Board 31 Inch For 36 Inch Biesemeyer

Published on 2011-04-09 15:40:00

The Delta 78-864B Unisaw Black Table Board 31 Inch For 36 Inch Biesemeyer. Constructed of hardwood alder frame & laminated particle board Laminated on three sides Backer board underside > read more

Delta 78-852 Universal Table Board

Published on 2011-04-09 15:38:00

The Delta 78-852 Universal Table Board. Gray, 27" x 44" x 2-1/2" Constructed of a hardwood alder frame and laminated particle board Laminate siding on three sides Backerboard underside > read more

Delta 78-850 Universal 27 x 14 Table Board

Published on 2011-04-09 15:36:00

The Delta 78-850 Universal 27 x 14 Table Board. > read more

Delta 78-806 6 Foot Miter Table System for 10 Inch Saws

Published on 2011-04-09 15:34:00

The Delta 78-806 6 Foot Miter Table System for 10 Inch Saws. Universal Miter Saw Tables offer extra fence and table support for improved cutting accuracy and increased production Designed to fit either the right or left side of most 10" and 12" moto > read more

Delta 78-804 4 Foot Miter Table System for 10 Inch Saws

Published on 2011-04-09 15:33:00

The Delta 78-804 4 Foot Miter Table System for 10 Inch Saws. Universal Miter Saw Tables offer extra fence and table support for improved cutting accuracy and increased production Designed to fit either the right or left side of most 10" and 12" moto > read more

Delta 78-802 2 Foot Miter Table System for 10 Inch Saws

Published on 2011-04-09 15:31:00

The Delta 78-802 2 Foot Miter Table System for 10 Inch Saws. Universal Miter Saw Tables offer extra fence and table support for improved cutting accuracy and increased production Designed to fit either the right or left side of most 10" and 12" moto > read more

Delta 50-302 Outfeed Table

Published on 2011-04-08 15:15:00

The Delta 50-302 Outfeed Table. Two-piece laminated table provides added support for maintaining proper stock alignment and preventing material shifting and tipping. Fits DELTA® UNISAW® Tilting Arbor Saws and may be easily adapted to fit most oth > read more

Delta 50-293 Mobile Bases and Extension

Published on 2011-04-07 15:49:00

The Delta 50-293 Mobile Bases and Extension. Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning. Dimensions: A: 23" " Dimensions: B: 27" " Front Handle Style: Use with: 31-1 > read more

Delta 50-289 Mobile Bases and Extension

Published on 2011-04-07 15:47:00

The Delta 50-289 Mobile Bases and Extension. Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning Use with: For UNISAWS® with 50"/52" Fences 20-5/8"x20-5/8" Combines 50-273 a > read more

Delta 50-288 Mobile Base for 31-260X Drum Sander

Published on 2011-04-07 15:45:00

The Delta 50-288 Mobile Base for 31-260X Drum Sander. > read more

Delta 50-286 Mobile Bases and Extensions

Published on 2011-04-07 15:43:00

The Delta 50-286 Mobile Bases and Extensions. Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning. Dimensions: B: 32" " Dimensions: A: 22-1/2" " Front Handle Style: Use with: > read more

Delta 50-284 Mobile Base and Extension

Published on 2011-04-07 15:40:00

The Delta 50-284 Mobile Base and Extension. Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning. Use with: Base extension used with: 50-273 Mobile Base for 10" UNISAW® saw > read more

Delta 50-278 Mobile Base and Extension For Hybrid Saws

Published on 2011-04-07 15:35:00

The Delta 50-278 Mobile Base and Extension. Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning. Use with: Hybrid Saws; 36-750 Cabinet Saw. Dimensions: A: 21-1/2" " Dimensi > read more

Delta 50-276 Mobile Bases and Extensions

Published on 2011-04-07 15:33:00

The Delta 50-276 Mobile Bases and Extensions Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning. Dimensions: B: 36-3/4" " Dimensions: A: 17-1/4" " Front Handle Style: Use wi > read more

Delta 50-274 Mobile Bases and Extensions

Published on 2011-04-07 15:32:00

The Delta 50-274 Mobile Bases and Extensions Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning. Dimensions: B: 19-1/2" " Dimensions: A: 17-1/4" " Front Handle Style: Use wi > read more

Delta 50-273 Mobile Bases and Extensions

Published on 2011-04-07 15:30:00

The Delta 50-273 Mobile Bases and Extensions Heavy-gauge steel and features a foot-operated control lever that raises and lowers the base for easy movement and positioning. Dimensions: A: 20-5/8" " Dimensions: B: 20-5/8" " Front Handle Style: Use wi > read more

Delta 50-257 For 36-L352 or 36-L552 Unisaw's with 52 Inch Biesemeyer Fence

Published on 2011-04-07 15:28:00

The Delta 50-257 For 36-L352 or 36-L552 Unisaw's with 52 Inch Biesemeyer Fence. Enhances mobility in the workshop. > read more

Delta 46-404 Inboard French Curl Tool Support

Published on 2011-04-06 17:03:00

The Delta 46-404 Inboard French Curl Tool Support. For bowl turning on inboard end of spindle 1-inch Post Made of cast iron for great durability and minimal vibration Rest fits bases with 1-inch diameter posts > read more

Delta 43-824 Router Spindle (HD)

Published on 2011-04-06 17:01:00

The Delta 43-824 Router Spindle (HD). > read more

Delta 43-811 1-1/4 Inch Shaper Spindle

Published on 2011-04-06 16:59:00

The Delta 43-811 -1/4 Inch Shaper Spindle. 5-1/4-inch Under nut Helps you shape wood to your liking Backed by 2-year warranty > read more

Delta 43-807 3/4 Inch Extra-Long Spindle

Published on 2011-04-06 16:57:00

The Delta 43-807 3/4 Inch Extra-Long Spindle. > read more

Delta 43-800 Router Bit Chuck

Published on 2011-04-06 16:54:00

The Delta 43-800 Router Bit Chuck Adapts heavy duty shaper to utilize 1/2" and 1/4" shank router bits. > read more

Delta 43-792 5 Speed Production Shape

Published on 2011-04-06 16:53:00

The Delta 43-792 5 Speed Production Shape. Dependable three phase motor has an automatic brake that stops cutter in seconds. Belt tension lever lets operator change spindle speed quickly and easily Work hold-downs help secure workpiece to table and > read more

Delta 43-791 5 Speed Production Shaper

Published on 2011-04-06 16:52:00

The Delta 43-791 5 Speed Production Shaper. Dependable 7-1/2hp, 3,450 RPM, three phase motor has an automatic brake that stops cutter in seconds. Work hold-downs help secure workpiece to table and fence to protect operator from chips and debris Drop > read more

Delta 43-495X 3/4 Inch Solid Spindle Shaper

Published on 2011-04-06 16:49:00

The Delta 43-495X 3/4 Inch Solid Spindle Shaper. Spindle 3-Horsepower shaper includes perma-lube ball bearings for accurate cuts at high speeds Unique poly-V drive system efficiently channels torque to the spindle Includes a 40-by-27-Inch table with > read more

Delta 43-188 Sliding Shaper Jig

Published on 2011-04-06 16:47:00

The Delta 43-188 Sliding Shaper Jig. Provides greater cutting accuracy during a variety of shaping operations Features three guide bar locations for positioning the work piece as close as possible to both large and small diameter shaper cutters Twel > read more

Delta 40-251 Quick Set Blade Chuck

Published on 2011-04-06 16:46:00

The Delta 40-251 Quick Set Blade Chuck. Requires no blade-centering tools or wrenches. Speeds up blade changing and threading and increases productivity. Designed to fit Delta 40-540 and 40-560 scroll saws Knurled knob provides adjustment of the cla > read more

Delta 34-555 Sliding Table Attachment

Published on 2011-04-05 15:51:00

The Delta 34-555 Sliding Table Attachment. Increases the job capacity of DELTA® UNISAWS®, 10" Tilting Arbor Saws (not for left tilt saws), 10" CONTRACTOR'S SAWS® (with old style stand and top shelf only) and heavy duty wood shapers Handles stock > read more

Delta 34-264 Dado Insert

Published on 2011-04-05 15:49:00

The Delta 34-264 Dado Insert. For right tilt saw Accommodates a 7- or 8-inch dado set Uses existing screws for easy installation One insert included > read more

Delta 34-184 Universal Tenoning Jig

Published on 2011-04-05 15:47:00

The Delta 34-184 Universal Tenoning Jig. Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004" Universal miter bar for use with all table saws with 3/8"x3/4" miter slots Adjustable 90° positive stop for accurate repetiti > read more

Delta 34-183 Tenoning Jig

Published on 2011-04-05 15:45:00

The Delta 34-183 Tenoning Jig. Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots Adjustable 90 degree positive stop for accurat > read more

Delta 33-895X Standard Table Insert for Table Saw

Published on 2011-04-05 15:44:00

The Delta 33-895X Standard table insert for table saws. Fits 10" Tilting Arbor Saw, 10" CONTRACTOR'S SAWS®, 10" Professional Saw. > read more

Delta 33-892 12 Inch Radial Arm Saw

Published on 2011-04-05 15:42:00

The Delta 33-892 12 Inch Radial Arm Saw 200/230/460-Volt, 3 Phase. Unique turret arm action permits saw blade to rotate 360 degree above worktable, giving full table capacity for left and right hand miters Rigid channel, cast-iron frame and heavy co > read more

Delta 33-890 12 Inch Radial Arm Saw

Published on 2011-04-05 15:41:00

The Delta 33-890 12 Inch Radial Arm Saw 230-Volt 1-Phase. Unique turret arm action permits saw blade to rotate 360 degree above worktable, giving full table capacity for left and right hand miters Rigid channel, cast-iron frame and heavy column prov > read more

Delta 33-723 Cutterhead Return Attachment

Published on 2011-04-05 15:39:00

The Delta 33-723 Cutterhead Return Attachment. Returns cutterhead automatically out of the way, behind guide fence after cut. Helps speed up production. > read more

Delta 33-420 18 Inch Radial Arm Saw

Published on 2011-04-05 15:37:00

The Delta 33-420 18 Inch Radial Arm Saw 230-Volt 1 phase. Exclusive, turret arm construction permits the saw blade to rotate a full 360 degree above the worktable. Unique, Micro-Set miter stops assure perfect right and left miter cuts for the life o > read more

Delta 33-411 16 Inch Radial Arm Saw

Published on 2011-04-05 15:35:00

The Delta 33-411 16 Inch Radial Arm Saw 230/460-Volt 3 phase. Turret Arm construction permits blade 360 degree rotation above worktable yielding full-capacity for mitering large pieces and rough-sawn or framing stock. Micro-Set stops assure perfect m > read more

Delta 17-910 3/8 Inch x 3/8 Inch Professional Mortising Chisel and Bit Set

Published on 2011-04-04 14:09:00

The Delta 17-910 3/8 Inch x 3/8 Inch Professional Mortising Chisel and Bit Set. High quality chisel and bit for professionals. Mortising chisels and bits for use with mortising attachment mounted on drill press to cut square holes for various sized > read more

Delta 17-909 5/16 Inch x 5/16 Inch Professional Mortising Chisel and Bit Set

Published on 2011-04-04 14:06:00

The Delta 17-909 5/16 Inch x 5/16 Inch Professional Mortising Chisel and Bit Set. High quality chisel and bit for professionals Mortising chisels and bits for use with mortising attachment mounted on drill press to cut square holes for various size > read more

Delta 17-908 1/4 Inch x 1/4 Inch Professional Mortising Chisel and Bit Set

Published on 2011-04-04 14:05:00

The Delta 17-908 1/4 Inch x 1/4 Inch Professional Mortising Chisel and Bit Set. High quality chisel and bit for professionals Mortising chisels and bits for use with mortising attachment mounted on drill press to cut square holes for various sized > read more

Delta 15-344 15 Inch Production Drill Presses

Published on 2011-04-04 14:01:00

The Delta 15-344 15 Inch Production Drill Presses. Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2" diameter. "VS > read more

Delta 15-343 15 Inch Variable Speed Production Floor Drill Press

Published on 2011-04-04 13:59:00

The Delta 15-343 15 Inch Variable Speed Production Floor Drill Press. 3/4 HP single-phase motor with a 24-volt push-button magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. > read more

Delta 15-341 15 Inch Variable Speed Drill Press

Published on 2011-04-04 13:57:00

The Delta 15-341 15 Inch Variable Speed Drill Press. Extra-large spindle bearings -inch6 PLUS 6-inch and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Wide, test-proven speed range gi > read more

Delta 15-334 15 Inch Variable Speed Drill Press

Published on 2011-04-04 13:56:00

The Delta 15-334 15 Inch Variable Speed Drill Press. Extra-large spindle bearings 6 PLUS 6 and VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Wide, test-proven speed range gives you a > read more

Delta 15-333 15 Inch Variable Speed Drill Press

Published on 2011-04-04 13:55:00

The Delta 15-333 15 Inch Variable Speed Drill Press. Extra-large spindle bearings 6 PLUS 6- and -VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Wide, test-proven speed range gives you > read more

Delta 15-331 15 Inch Variable Speed Drill Press

Published on 2011-04-04 13:53:00

The Delta 15-331 15 Inch Variable Speed Drill Press. Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter. > read more

Delta 15-263 15 Inch 6 Speed Drill Press

Published on 2011-04-04 13:52:00

The Delta 15-263 15 Inch 6 Speed Drill Press. Extra-large spindle bearings 6 PLUS 6 and VS6- spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2-inch diameter. Wide, t > read more

Porter Cable PTX5 5 Piece Reciprocating Saw Blade Set

Published on 2011-04-03 15:01:00

The Porter Cable PTX5 5 Piece Reciprocating Saw Blade Set. > read more

Porter Cable PTX4 4 Inch Angle Grinder

Published on 2011-04-03 14:59:00

The Porter Cable PTX4 4 Inch Angle Grinder. Three position support handle allows access to tight spaces Metal wheel guard allows for safe operation Powerful 3/4 HP high performance motor Porter Cable PTX4 4 Inch Angle Grinder Specifications:Speed: 1 > read more

Porter Cable PTX2 Angle Rotary Tool

Published on 2011-04-03 14:57:00

The Porter Cable PTX2 Angle Rotary Tool. 105° angle allows for flexibility in tight spaces Compact and lightweight design with ergonomic grip for ease of use Lock-off throttle prevents accidental start up Porter Cable PTX2 Angle Rotary Tool Specifi > read more

Porter Cable PTS8 6 Inch Random Orbit Sander

Published on 2011-04-03 14:55:00

The Porter Cable PTS8 6 Inch Random Orbit Sander. 3/16" orbit Vacuum ready Built-in speed control with rear exhaust Lightweight, low profile design Ergonomic rubber comfort grip provides maximum operator control Smooth, swirl-free finishes Porter Ca > read more

Porter Cable PTS7 6 Inch Random Orbit Sander

Published on 2011-04-03 14:53:00

The Porter Cable PTS7 6 Inch Random Orbit Sander. 3/16" orbit Non-vacuum Built-in speed control with rear exhaust Lightweight, low profile design Ergonomic rubber comfort grip provides maximum operator control Smooth, swirl-free finishes Porter Cabl > read more

Porter Cable PTS6 5 Inch Random Orbit Sander

Published on 2011-04-03 14:51:00

The Porter Cable PTS6 5 Inch Random Orbit Sander. 3/32" Orbit Vacuum ready Built-in speed control with rear exhaust Lightweight, low profile design Ergonomic rubber comfort grip provides maximum operator control Smooth, swirl-free finishes Porter Ca > read more

Porter Cable PTS5 5 Inch Random Orbit Sander

Published on 2011-04-03 14:49:00

The Porter Cable PTS5 5 Inch Random Orbit Sander. 3/32" Orbit Non-vacuum Built-in speed control with rear exhaust Lightweight, low profile design Ergonomic rubber comfort grip provides maximum operator control Smooth, swirl-free finishes Porter Cabl > read more

Porter Cable PTS4 5 Inch Random Orbit Sander

Published on 2011-04-03 14:47:00

The Porter Cable PTS4 5 Inch Random Orbit Sander. 3/16" orbit Vacuum ready Built-in speed control with rear exhaust Lightweight, low profile design Ergonomic rubber comfort grip provides maximum operator control Smooth, swirl-free finishes Porter Ca > read more

Porter Cable PTS3 5 Inch Random Orbit Sander

Published on 2011-04-03 14:45:00

The Porter Cable PTS3 5 Inch Random Orbit Sander. 3/16" orbit Non-vacuum Built-in speed control with rear exhaust Lightweight, low profile design Ergonomic rubber comfort grip provides maximum operator control Smooth, swirl-free finishes Porter Cabl > read more

Porter Cable PTS2 High-Speed Sander

Published on 2011-04-03 14:43:00

The Porter Cable PTS2 High-Speed Sander. Ergonomic grip for improved comfort and stability. Balanced 1/2 HP motor produces low vibration. Porter Cable PTS2 High-Speed Sander Specifications:Speed: 18,000 rpm Strokes/Min: N/A spm Blows/Min: N/A bpm Tor > read more

Porter Cable PNS18088-1 7/8 Inch Narrow Crown Staples (1000 PK)

Published on 2011-04-02 15:09:00

The Porter Cable PNS18088-1 7/8 Inch Narrow Crown Staples (1000 PK). > read more

Porter Cable PNS18088 18 Gauge 7/8 Inch Narrow 1/4 Inch Crown Staples (5000 PK)

Published on 2011-04-02 15:07:00

The Porter Cable PNS18088 18 Gauge 7/8 Inch Narrow 1/4 Inch Crown Staples (5000 PK). 7/8" long x 1/4" wide 18 Gauge Narrow Crown Staples 5000 per Box > read more

Porter Cable PNS18075 18 Gauge 3/4 Inch Narrow Crown 1/4 Inch Staple 5000 PK

Published on 2011-04-02 15:05:00

The Porter Cable PNS18075 18 Gauge 3/4 Inch Narrow Crown 1/4 Inch Staple 5000 PK. Fastener Gauge: 18 Pack Quantity: 5,000 Fasteners Per Stick: 100 Master Pack Quantity: 10 Fastener Coating: Galvanized; Crown Width: 1/4-inch > read more

Porter Cable PNS18063 18 Gauge 5/8 Inch Long Narrow Crown 1/4 Inch Staple (5000 PK)

Published on 2011-04-02 15:04:00

The Porter Cable PNS18063 18 Gauge 5/8 Inch Long Narrow Crown 1/4 Inch Staple (5000 PK) Fastener Gauge: 18 Pack quantity: 5,000 Fasteners Per Stick: 100 Master Pack Quantity: 10 Fastener Coating: Galvanized; Crown Width: 1/4-inch > read more

Porter Cable PNS18050 18 Gauge 1/2 Inch Narrow Crown 1/4 Inch Staple (5000 PK)

Published on 2011-04-02 15:02:00

The Porter Cable PNS18050 18 Gauge 1/2 Inch Narrow Crown 1/4 Inch Staple (5000 PK). Fastener Gauge: 18 Pack quantity: 5,000 Fasteners Per Stick: 100 Master Pack Quantity: 6 Fastener Coating: Galvanized; Crown Width: 1/4-inch > read more

Porter Cable PN650 Palm Nailer Kit

Published on 2011-04-02 15:00:00

The Porter Cable PN650 Palm Nailer Kit. Capacity from 1-1/4" to 6-1/2" (3d to 70d) Comes with four different nose tips "No Mar" finish tip: for finish nail up to 3d Magnetic tip: for driving 3d to 16d common nails Standard tip: for common nails up t > read more

Porter Cable PIN100 1 Inch Pin Nailer Kit

Published on 2011-04-02 14:58:00

The Porter Cable PIN100 1 Inch Pin Nailer Kit. Uses 23 ga. micro pin nails from 1/2" to 1" long similar to Senco® models Tool automatically adjusts for different fastener lengths for esier loading and less problems with pins out of spec Convenient > read more

Porter Cable PH350IS 3,500 Watt Portable Generator

Published on 2011-04-02 14:55:00

The Porter-Cable PH350IS 3,500-watt electric portable generator packs 7,500 surge watts. It comes with a 6.5 HP Honda OHV engine and a 3.8-quart gas tank, which provides 2.3 hours of run time at 1/2 load and 1-1/2 hours at full load. The pro-line fra > read more

Porter Cable PFN16250-1 16 Gauge 2-1/2 Inch Finish Nails (1000 PK)

Published on 2011-04-02 14:53:00

The Porter Cable PFN16250-1 16 Gauge 2-1/2 Inch Finish Nails (1000 PK). Fastener gauge: 16 Pack quantity: 1,000 Fasteners per stick: 50 Master pack quantity: 10 Fastener coating: galvanized; fastener point type: chisel > read more

Porter Cable PFN16250 2-1/2 Inch Long Standard Finish Nails (2,500PK)

Published on 2011-04-02 14:52:00

The Porter Cable PFN16250 2-1/2 Inch Long Standard Finish Nails (2,500PK). > read more

Porter Cable PC18RS 18V Reciprocating Saw

Published on 2011-04-01 17:19:00

The Porter Cable PC18RS 18V Reciprocating Saw. Patented tool free blade change system provides quick and easy tool-free blade changes Variable-speed trigger with an electric brake provides more control for cutting a variety of materials Pivoting sho > read more

Porter Cable PC18JS 18V Expansion Jig Saw

Published on 2011-04-01 17:00:00

The Porter Cable PC18JS 18V Expansion Jig Saw. Tool-Free Shoe with 0, 45° Bevel Stops Provides Hassle-Free Transitions from Straight to 45° Bevel Cuts 3-position orbital control provides versatility for a wide range of cutting applications 2,500 s > read more

Porter Cable PC18ID 18V Expansion Impact Driver

Published on 2011-04-01 16:58:00

The Porter Cable PC18ID 18V Expansion Impact Driver. Impact driver delivers high-torque output without kick-back With a length of only 6.5", the Porter Cable impact driver fits into tight areas not accessible by larger impact drivers and drills Heav > read more

Porter Cable PC18HV 18V Bare Hand Vacuum

Published on 2011-04-01 16:30:00

The Porter Cable PC18HV 18V Bare Hand Vacuum. Armor Clad GORE CleanStream Filter resists clogging and cleans easily Extension Hose with Crevice Tool For Access in Tight Spaces Universal Hose Adaptor connects to dust extraction ports on Porter Cable > read more

Porter Cable PC18FL 18V Pivoting Head Flashlight

Published on 2011-04-01 16:27:00

The Porter Cable PC18FL 18V Pivoting Head Flashlight. Adjustable beam allows light to operate in flood or spot lighting modes 90° pivoting head allows beam to be positioned in any orientation Soft grip handle improves user comfort and control 5 W b > read more

Porter Cable PC18DS 18V Expansion Detail Sander

Published on 2011-04-01 16:24:00

The Porter Cable PC18DS 18V Expansion Detail Sander. Large 19 sq. in. Hook-and-Loop Platen for fast stock removal Tapered Platen for Sanding Corners and Tight Spaces Dust Sealed Switch Extends Switch Life Detachable Vacuum Port for Dust Management 1 > read more

Porter Cable PC18CSL 18V Circular Saw with Laser

Published on 2011-04-01 16:22:00

The Porter Cable PC18CSL 18V Circular Saw with Laser. 6-1/2" blade enables the saw to cut 2" dimensional lumber at a 45° bevel On board adjustable laser guide allows better cutting guidance & accuracy Shoe bevels up to 50° to give more flexibi > read more

Porter Cable PC18BLX 18V LX Lithium Battery Pack

Published on 2011-04-01 16:19:00

The Porter Cable PC18BLX 18V LX Lithium Battery Pack. The LX Lithium battery offers more runtime than a standard P-C Lithium battery, giving extended performance in a lightweight, compact pack Lithium Ion batteries hold charge for extended periods, > read more

Porter Cable PC18BLEX 18V EX Lithium Pack

Published on 2011-04-01 16:17:00

The Porter Cable PC18BLEX 18V EX Lithium Pack. The LX Lithium battery offers more runtime than a standard P-C Lithium battery, giving extended performance in a lightweight, compact pack Lithium Ion batteries hold charge for extended periods, so pack > read more

Porter Cable PC18B-2 18V NiCad Battery 2-Pack

Published on 2011-04-01 16:14:00

The Porter Cable PC18B-2 18V NiCad Battery 2-Pack. High output nickel cadmium battery cells with "no memory" technology provide up to 500 recharges 1.5 Ah cells provide extended runtime on each charge Porter Cable PC18B-2 18V Battery Specifications: > read more

Paslode IMCT 900420 Cordless Framing Nailer

Published on 2011-03-31 17:21:00

The Paslode IMCT 900420 Cordless Framing Nailer. Save time, work anywhere—No hoses or compressors to drag around Compact—Work easily in cramped spaces Heavy duty—Made for tough jobsite conditions Tool-free depth of drive—No wrenches needed P > read more

Paslode 900078NT Cordless 16 Gauge Stapler

Published on 2011-03-31 17:19:00

The Paslode 900078NT Cordless 16 Gauge Stapler. Cordless mobility means less mess & clutter, no dirty hoses to drag around! Powerful, drives 3/4" - 2" standard crown (1/2") 16 gauge staples Quick-clear feature provides easy access to nose to red > read more

Paslode 901000 Cordless 18 Gauge Brad Nailer

Published on 2011-03-31 17:17:00

The Paslode 901000 Cordless 18 Gauge Brad Nailer. Save time, work anywhere—No hoses or compressors to drag around Prevents wood splitting—18 Gauge leaves small holes Precise & compact—Open line of site, shoots where you want it to! Reliabl > read more

Paslode 902000 Cordless 16 Gauge Straight Finish Nailer

Published on 2011-03-31 17:15:00

The Paslode 902000 Cordless 16 Gauge Straight Finish Nailer. Save time, work anywhere—No hoses or compressors to drag around Precise & compact—Open line of site, shoots where you want it to! Reliable power—Depth of drive prevents wood dama > read more

Paslode 900600 Cordless 16 Gauge Angled Finish Nailer

Published on 2011-03-31 17:12:00

The Paslode 900600 Cordless 16 Gauge Angled Finish Nailer. Save time, work anywhere—No hoses or compressors to drag around. Precise & compact—Open line of site, drives where you want it to! Reliable power—Depth of drive prevents wood damag > read more

Paslode CF325 Cordless Framing Nailer

Published on 2011-03-31 17:10:00

The Paslode CF325 Cordless Framing Nailer. Redesigned nose — For toe-nailing at any angle Faster tool performance — Greater productivity Lasts 5x longer between cleanings! — 50,000 nails! Just drop in fuel and go — New orange quicklode™ fu > read more

Paslode PF150S-PP Positive Placement Metal Connector Nailer for 1 1/2 Nails

Published on 2011-03-31 17:03:00

The Paslode PF150S-PP Positive Placement Metal Connector Nailer for 1 1/2 Nails. Durable and powerful for tough jobsite conditions Lightweight, compact design fits in tight spaces 2-strip magazine - high capacity, less reloading Non-slip cushioned g > read more

Paslode R175-C Roofing Coil Nailer

Published on 2011-03-31 17:00:00

The Paslode R175-C Roofing Coil Nailer. Powerful—20% more power, drives nails flush through layers of roofing shingles Precise—Adjustable shingle guide allows for accurate nail placement Time-saving—Sets 8 nails per second Easy-to-use—Single > read more

Paslode S150-W16R Construction Stapler

Published on 2011-03-31 16:58:00

The Paslode S150-W16R Construction Stapler. Drives 5/8"- 1-1/2" wide crown (15/16") 16 gauge staples Tool-less quick clear nose removes jams easily Top load magazine for easy reload and reduced nail waste Soft grip handle, for on the job comfort Sav > read more

Paslode S200-W16 Insulation Sheathing Stapler

Published on 2011-03-31 16:55:00

The Paslode S200-W16 Insulation Sheathing Stapler. Drives 3/4" - 2" wide crown (15/16") 16 gauge staples Tool-less quick clear nose removes jams easily Soft grip handle, for on the job comfort Extended bumper life, over 600,000 cycles without failur > read more

Porter Cable FR13238G Round Head Decking Nail (22º) Smooth Shank, Galv., .113 X 2-3/8 Inch (5000 PK)

Published on 2011-03-30 13:44:00

The Porter Cable FR13238G Round Head Decking Nail (22º) Smooth Shank, Galv., .113 X 2-3/8 Inch (5000 PK). > read more

Porter Cable FR13238 Round Head Decking Nail (22º) Smooth Shank, Coated, 113 X 2-3/8 Inch (5000 PK)

Published on 2011-03-30 13:42:00

The Porter Cable FR13238 Round Head Decking Nail (22º) Smooth Shank, Coated,, .113 X 2-3/8 Inch (5000 PK). > read more

Porter Cable FR13200 Round Head Decking Nail (22º) Smooth Shank, Coated, .113 X 2 Inch (6000 PK)

Published on 2011-03-30 13:41:00

The Porter Cable FR13200 Round Head Decking Nail (22º) Smooth Shank, Coated, .113 X 2 Inch (6000 PK). > read more

Porter Cable FN250C 16 Ga. 2-1/2 Inch Finish Nailer Kit

Published on 2011-03-30 13:38:00

The Porter Cable FN250C 16 Ga. 2-1/2 Inch Finish Nailer Kit. Maintenance-free motor designed to deliver long life Internal piston catch for consistent max power on every shot Tool-free depth-of-drive adjustment with detents for proper setting of nai > read more

Porter Cable FN16PP 16 Gauge Finish Nail Project Pack

Published on 2011-03-30 13:36:00

The Porter Cable FN16PP 16 Gauge Finish Nail Project Pack. Fastener gauge: 16 Pack quantity: 900 (1-1/4-inch - 300; 2-inch - 300; 2-1/2-inch - 300) Fasteners per stick: 50 Master pack quantity: 10 Fastener coating: galvanized; fastener point type: c > read more

Porter Cable FLC200 2 Inch Flooring Cleat Nails (1000 PK)

Published on 2011-03-30 13:34:00

The Porter Cable FLC200 2 Inch Flooring Cleat Nails (1000 PK) . > read more

Porter Cable FLC150 1 1/2 Inch Flooring Cleat Nails (1000 PK)

Published on 2011-03-30 13:33:00

The Porter Cable FLC150 1 1/2 Inch Flooring Cleat Nails (1000 PK) . > read more

Porter Cable FCR13200 Framing Nails 113 X 2 Inch (5000 PK)

Published on 2011-03-30 13:31:00

The Porter Cable FCR13200 Framing Nails 113 X 2 Inch (5000 PK). > read more

Porter Cable FCN200 2 Inch Flooring Cleat Nailer

Published on 2011-03-30 13:29:00

The Porter Cable FCN200 2 Inch Flooring Cleat Nailer. Drives "L" shape cleat nails from 1-1/2" to 2" Pneumatic driving action consistently drives fastener for better finished installation Unit comes fully assembled and ready for use right out of the > read more

Porter Cable FC350A 3-1/2 Inch Clipped-Head Framing Nailer Kit

Published on 2011-03-30 13:27:00

The Porter Cable FC350A 3-1/2 Inch Clipped-Head Framing Nailer Kit. Uses 30° to 34° 2" to 3-1/2" x .113" to .131" paper collated clipped-head framing nails Power to drive nails (up to 3-1/2" x .131") into engineered lumber Compact body design for > read more