Posted on Nov 27 2011 at 03:11:16 AM in B2B
Parts Feeder,Parts Feeders,Vibratory Parts Feeder
Vibratory parts feeder is the machine that orient parts so that robots or other automated processes can capture and use or package the parts or components. Applications range from packaging pills in the pharmaceutical industry to sparkplug production in the automotive industry. The main difference between parts feeders is their method of directing the feed.
Vibrating Grizzly Feeder are the most common type of vibrating feeder. The bowl has a helical track which climbs the inside wall of the bowl. Parts are dumped into the bowl that vibrates and turns. As the parts climb the track they encounter obstacles that orient the parts in a certain way. So that they can be easily used further down the line.
Centrifugal rotary feeders use a bowl that spins and forces parts to the outside of the bowl. At the outside edge of the bowl, the crusher parts are channeled into receivers when the parts are in the right orientation. From the receiver, they go onto a track that moves the parts to the next stage of production. Centrifugal feeders are usually faster and less noisy than vibratory feeder design. They also tend to mar parts less than other types of feeders.
Pneumatic feeders move and position parts by means of a pneumatic piston. The piston functions via hydraulic (liquid) pressure or an air-driven motor to force parts through a tube. These units are ideally suited to convey closures to capping machines, but are also applicable for handling many other small parts including liners, fitments, corks, capsules, etc.
The bowls of vibrating feeder manufacturers are commonly available in two configurations, although custom bowl types are manufactured. Cascade bowls, also known as inside track bowls, are primarily used for feeding easily oriented parts like screws and dowels. They are often quieter and less costly than outside-track designs. Outside-track bowls are used when more intricate tooling is required for proper part orientation, for higher feed rates, or for multiple lines of feed. The outside track is pitched downward to improve the separation and orientation of the parts.
Programmable parts feeders are also available.
They are more flexible than traditional parts feeders and may be programmed to change the way they isolate or orient parts. Programmable feeders are available in several different configurations ranging from programmable frequency of vibration in traditional types of crusher, to sensor driven actuators that reorient parts. Robotic parts feeders that use sensors and manipulators to orient parts are also manufactured.
Created: Nov 27 2011 at 03:11:16 AM
Updated: Nov 27 2011 at 03:11:16 AM
© 2006-2014 OnToplist.com, All Rights Reserved