It is necessary for rivets to be paired with a good rivet driver to ensure that they are securely fastened and properly alligned. With so many rivet drivers around, which one should you buy? Flexco has the right one for you. Joining their line of rivet drivers is the new Pneumatic Single Rivet Driver. Depending on the rivet size, the new rivet driver requires a minimal 6.9 CFM and 45-95 p.s. It can be used in conjunction with rivets with washers and new steel guide blocks that are specially designed. Because of this, the Pneumatic Single Rivet Driver's maximum driving accuracy is ensured. Speed and consistency are also assured as this new tool needs only trigger pull for every rivet. Compared to the use of a hammer or a 5-prong drive, installation time and operator fatigue can be reduced by as much as 33-50 percent depending on the operator. With a weight of just a little under 13 lbs, it can be used with minimal or no training at all. Lastly, the Pneumatic Single Rivet Driver is easy to use as you just need to connect it to a compressor, set the proper p.s.i., insert the rivets into their corresponding areas in the guide block, and drive away. 

Look for other Flexco products on MROSupply. To browse other products, click here. 

http://www.mrosupply.com