Grinding Mill Repair,Grinder Machine Maintenance

Make sure power-off and avoid starting the Series Super thin grinding mill and Trapezium Grinding Mill unexpected before maintaining and repairing the machine. First stop all the equipments then start malignance and with Grinding Mill Repair.

1. Prior to installation of the TGM Series Super Pressure Trapezium Grinding Mill, all the people who will be assigned to operate the equipment have to be technically trained to know the principle and rules of operation. Someone should be specially selected and put in charge of the operation.
2. To ensure normal and safe operation of the equipment, a manual containing strict rules and procedures for its operation, maintenance and repair should be made.
3. Engage for the reserve quantity of the material needed during production process, and tools of repair, oil, grease, and enough spare parts.
4. Fill the oil according to the setting time and setting position, to ensure the normal running of the machine and to extend Grinder Machine Maintenance.
5. After a period of usage, all the matching equipments should be checked in order to be convenient for maintenance and repair.
6. To replace the worn-and-torn parts such as rollers, rings and shelves. Be sure to fasten connecting bolts, nut collars to fix rollers properly. Be sure to lubricate the grinding parts.
7. Roller should be replaced after 500-hours usage. To check the bearing in them and replace bracken ones, and then fill enough oil and grease (with oil-pump or grease-gun)
8. Vane of classifier, impeller or vane of blower should be repaired or changed regularly.
9. Bag filters need to be slapped to get rid of the dust adhere to the inner surface.
10.To start the elevator without load and the feed rate of the elevator and feeder should not exceed the capacity of the elevator, or it will lead the block of under part of the elevator. Pay attention to the working conditions of the chain and the bucket, change the broken ones in time if needed.
11.Change the worn jaw plate, toggle plate in time in order to avoid the damage of other parts. Toggle plate is the protective parts for over loading. If the load exceeds the maximum load of the toggle plate, it will break off or become bend. Another new toggle plate now should replace the damaged one.