Being a do-it-yourself (DIY) person can be very beneficial especially where costs are involved. By accomplishing certain tasks on your own, you literally eliminate labor costs. This obviously leads to reduced overall costs when undertaking any project. One such project you can undertake on your own is to lay a conduit body, especially when constructing a new house or erecting an extension.
Conduits are basically tubular gadgets designed to be placed on walls. It is through them that service wires pass to different rooms in a building. You will most certainly see electricians use them when wiring a building.
One of the main functionality of conduits is that they allow you to easily access wire cables meant to serve different rooms. You simply insert the needed cables into the inlet and push the same until the cables reach the outlet point, which can be a junction box or a switch. Conduits also serve to offer protection to cables within from unnecessary damage.
One thing you seriously need to note is the fact that conduits are made of varied materials. It is therefore very important that you consider the purpose of installing the same so that you only buy the most appropriate one in relation to material used. You will most likely come across conduits made of aluminum, galvanized steel and PVC. All these PVC electrical materials are suitable for use in different environments.
Types of conduits
Apart from the material used in making conduits, you are also obligated to only buy a type that best suits your wiring needs. Note that the different types also serve different purposes. The reality however is that you will need to buy different types of conduits so that you effectively wire your building perfectly.
* L-Shaped - This is one of the most common types of conduits available. You will need an L-shaped conduit if wiring your building involves passing wires at tight angles such as 90-degree angles. The L-shape allows you to easily guide wires through to the desired location on the wall.
* T-Shaped - This is one of the most important type of conduits you may not do without when wiring a building. Its importance lies in the fact that it allows you to easily route cables in three different directions. You can easily use it to route three different wires; one down the wall, one to the left and the other toward the right.
* C-Shaped - Although commonly referred to as C-shaped cables, this type is generally straight. It is probably the most common types of conduits you will come across. You will obviously need this type because of the need to pull electrical wire cables over a long and straight wall.
Conduits are generally designed with access covers at the inlet that you can easily remove. Depending on the functionality, you may need to replace the covers after wiring. It is important to point out that the above are not the only types of conduits you are likely to come across. These are just the most common that are widely used in homes. There are also industrial conduits such as service conduits that some home owners are now buying and using at home. For more information about conduits visit Dfliq.com.